SAFETY INSTRUCTIONS

1Undo the bar nuts that

hold the clutch cover and chain brake, using the combination spanner. Then tighten the nuts by hand as tight as you can.

2 Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it not hang slack on the underside of the bar.

3 Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull the chain round freely by hand and that it is not slack on the bottom of the bar.

The position of the chain tensioning screw varies from model to model. See the” What is what” section to find out where it is on your saw.

4 Lubricating cutting equipment

Poor lubrication of cutting equipment may cause the chain to snap and lead to serious, even fatal injuries.

A Chain oil

•Chainsaw chain oil must demonstrate good adhesion to the chain and also maintain its flow caracteristics regardless of whether it is warm summer or cold winter weather.

•As a chainsaw manufacturer we have developed an optimal chain oil which has a vegetable oil base. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage.

•If our own chain oil is not available, standard chain oil is recommended.

•In areas where oil specifically for lubrication of saw chains is unavailable, ordinary EP 90 transmission oil may be used.

•Never use waste oil!

This is dangerous for yourself, the saw and the environment.

BFilling with chain oil

• All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The sizes of the chain oil

tank and fuel tank have been chosen so that the saw will run out of fuel before running out of oil. This means that you should never run with a dry chain.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a weak mixture may mean that the fuel lasts longer than the oil). You should also use the recommended cutting equipment (a bar that is too long will use more chain oil). The above conditions also apply to models with an adjustable oil pump.

14 – English

Page 13 Page 15
Page 14
Image 14
Jonsered CS 2145, CS 2141, CS 2150 Lubricating cutting equipment, Chain oil, Filling with chain oil, Never use waste oil
Page 13 Page 15

CS 2145, CS 2150, CS 2141 specifications

The Jonsered CS 2141, CS 2150, and CS 2145 chainsaws are renowned for their powerful performance and advanced technologies, making them the top choice for both professional loggers and enthusiastic DIYers. Each model shares a commitment to delivering reliability, efficiency, and precision in cutting, while still prioritizing user comfort and safety.

The CS 2141 model is designed with a robust 40.9 cc engine that provides strong power output while remaining lightweight, making it easy to maneuver. This chainsaw features a 15-inch guide bar, ideal for tackling small to medium-sized trees and clearing brush. The innovative fuel system ensures longer running times, reducing the frequency of refueling interruptions. A hallmark of this model is its Easy Start system, eliminating the hassle of hard starts to get you cutting quickly.

Moving up, the Jonsered CS 2150 boasts a slightly larger engine capacity of 50.2 cc, which translates to enhanced power, particularly useful for more demanding cutting tasks. This model is equipped with a 20-inch guide bar, allowing for efficient felling and limbing of larger trees. Its design incorporates the Air Injection air filtration system that separates debris from the air, extending the life of the air filter and reducing maintenance needs. The lightweight design coupled with anti-vibration technology makes operating this model comfortable, even during extended use.

The CS 2145 model is a versatile chainsaw that finds a perfect balance between power and weight. With a 45.7 cc engine, it provides excellent cutting performance for a range of applications. It features a 16-inch guide bar, making it adaptable for various tasks from pruning to more extensive logging work. Like its counterparts, the CS 2145 includes the Smart Start technology for effortless starting and an automatic oil pump to ensure a steady flow of lubrication to the chain, increasing the overall lifespan of the saw.

All three models utilize Jonsered's revolutionary X-Torq engine technology, which significantly reduces fuel consumption and emissions, underlining their commitment to environmentally friendly operation. Furthermore, each chainsaw is ergonomically designed, with focus on comfortable grip and controls that allow users to work with precision and ease.

In summary, the Jonsered CS 2141, CS 2150, and CS 2145 chainsaws combine cutting-edge technology with practical features that meet the needs of users in various cutting conditions. With powerful engines, advanced filtration systems, and user-friendly designs, these models set a high standard in the chainsaw market.
Top Page Image Contents