Jøtul GI 425 Camden
Direct Vent Gas Fireplace
Manufactured and Distributed by:
Jøtul A.S.A.
Fredrikstad, Norway
Jøtul North America
Gorham, Maine
MEA No.
Test Standards
This appliance complies with National Safety standards and is tested and listed by Intertek Testing Services of Middleton, Wisconsin.
In addition, the Jøtul GI 425 DV gas fireplace
insert has been tested and listed as a direct vent gas fireplace heater and listed to ANSI
Specifications
Input Rates
Natural Gas
26,000 BTU/hr. maximum input
13,000 BTU/hr. minimum input
Propane
26,000 BTU/hr. maximum input
13,000 BTU/hr. minimum input
Inlet Pressure: | MIN | MAX | |
Natural Gas: | 5.0 WC (1.24 kPa) | 7.0 WC (1.74 kPa) | |
Propane: | 12.0 WC | (2.98 kPa) | 14.0 WC (3.48 kPa) |
Manifold Pressure: | MIN | MAX | |
Natural Gas: | 1.2 WC (0.29 kPa) | 3.8 WC (0.95 kPa) | |
Propane: | 2.9 WC (0.72 kPa) | 11.0 WC (2.74 kPa) |
Steady State Efficiency: 77.3%
A.F.U.E. Efficiency: 67.9%
Piezo Ignitor / Standing Pilot
THIS FIREPLACE IS SHIPPED AS A NATURAL GAS FIREPLACE ONLY. IF USE WITH PRO- PANE IS DESIRED, THE FIREPLACE MUST BE CONVERTED TO USE WITH PROPANE. FOR YOUR CONVENIENCE THIS FIREPLACE IS SHIPPED WITH A PROPANE CONVERSION KIT.
Accessories
Antique Brick Panel Kit | #155311 |
Wide Surround Kit - Cast Iron
Max. Opening Overlap: 47” Wide x 33 1/2” High.
Matte Black | #155323 |
Blue Black Enamel | #155324 |
Jøtul Iron Gray | #155354 |
Fuel Conversion Kit - NG to LP | #155300 |
Fuel Conversion Kit - LP to NG | #155303 |
Wall Thermostat | #750003 |
Remote Control | #129706 |
Jøtul QuickFace™ System
Rectangular Frame w/ Screen, |
|
Brushed Stainless Steel | #155312 |
Arched Frame w/ Screen, |
|
Brushed Stainless Steel | #155313 |
Rectangular Frame w/ Screen, |
|
Matte Black | #155314 |
Arched Frame w/ Screen, |
|
Matte Black | #155315 |
Double Doors, Cast Iron - |
|
Matte Black | #350565 |
Double Doors, Cast Iron - |
|
Blue Black Enamel | #350566 |
Suggested Tools for
Installation and Service
•External regulator (for Propane only)
•Piping which complies with local code
•Manual shutoff valve -
•Sediment trap - if required by code
•Tee joint
•Pipe wrench
•Pipe sealant
•10mm open end wrench
•1/2”, 7/16” open end wrench
•Phillips head screwdriver
•Flat head screwdriver
•1/4” nut driver
•Gloves
•Safety glasses
•Torx T20 screwdriver
•Leak test solution
•Power Drill
4