OC48/STM16 POS IOA

IOA label	ES2-S1 OC48 STM16 POS IOA
Number of IOA ports	■	1
Software release	■	First supported: 7.0.1
Description	■	30 W
	■ Half-height module
	■	See Slot Combinations on page 63 for more information on combining IOAs in
		a slot.
	■ Unchannelized, concatenated OC48/STM16 for POS
Capability	■	OC48/STM16
	■	HDLC framing
Software features	■	See OCx/STMx POS IOAs on page 56 for information about the layer 2 and layer
		3 protocols and applications that this module combination supports.
Line module compatibility	■	ES2 4G LM
SRP module compatibility	■	SRP-100
	■	SRP-320
Line module redundancy	■	Can be paired with an ES2 4G LM.
compatibility	■	Must be installed in the same redundancy group as an ES2 4G LM and ES2–S1
	■
		REDUND IOA combination.
Module redundancy support	■	Yes (Redundancy IOA must be installed in either slot 0 or slot 11)
Port redundancy support	■	Not applicable
Cables and connectors	■	Up to one LC full duplex connector
(single-mode short reach [SR-1])	■	Transmit power:
	■	Transmit power:
		■	min: –10 dBm
		■	max: –3 dBm
	■ Center wavelength: 1310 nm
	■	Receive input power:
		■	min: –18 dBm
		■	max: –3 dBm

■ Rated for 2 km (1.2 miles) of 9-micron core cable

■ See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.

40■ OC48/STM16 POS IOA

Juniper Networks E320 manual OC48/STM16 POS IOA, Single-mode short reach SR-1