Link Services PIC
■JUNOS 5.6 and laterSoftware release
■Power requirement: 0.17 A @ 48 V (8 W)
■Three versions:
■4 multilink bundles, 256 LFI links
■32 multilink bundles, 256 LFI links
■128 multilink bundles, 256 LFI links
■Multilink bonding, link fragmentation and interleaving (LFI), and tunneling
Description
■Rate limiting/policing per multilink bundle
■Byte-wise load balancing across multilink bundles
■Bonding T1 links enable service ranging from 1.5 Mbps through 12 Mbps
■Bonding E1 links enable service ranging from 2 Mbps through 16 Mbps
■Loopback function that encapsulates and de-encapsulates packets
Hardware features
For a list of the software features available for services PICs, see the JUNOS Services Interfaces
Configuration Guide.
■Protocol support:
■Multilink PPP (MLPPP)
■Multilink Frame Relay (MLFR)—FRF.15 and FRF.16
■Link fragmentation and interleaving (LFI)—FRF.12
■LFI over MLPPP
■IP-IP unicast tunneling
■GRE unicast tunneling
■PIM sparse mode unicast tunneling
Software features
One bicolor:
■Off—PIC is offline
■Green—PIC is online and at least one configured bundle is operating
■Amber—PIC is online, but no configured bundles are operating
LEDs
56 ■Link Services PIC
M20 Internet Router PIC Guide