DS3 PIC

LEDs

Alarms, errors, and events

One tricolor per port:

Off—Not enabled

Green—Online with no alarms or failures

Amber—Online with alarms for remote failures

Red—Active with a local alarm; router has detected a failure

Alarm indication signal (AIS)

Bit error rate test (BERT) functionality on PIC (you can configure one DS3 channel in BERT mode and configure the remaining channels to transmit and receive normal traffic)

Equipment failure (does not affect service)

Far-end block error (FEBE)

Frame error

Idle code, Idle received

Local and remote loopback

Loss of signal (LOS)

Out of frame (OOF)

Parity bit (P-bit) disagreements

Path parity error

Yellow alarm bit (X-bit) disagreements

DS3 PIC 37

Page 37
Image 37
Juniper Networks M20 manual DS3 PIC