Makita HRH01ZX2 specifications Specification, Standard equipment, Optional accessories

TECHNICAL INFORMATION						P 1/22
					PRODUCT
Models No.		HR262D/ BHR262, HR262TD/ BHR262T
Description		(HRH01C/ HRH01, HRH02C/ HRH02)*1			L
		26mm (1") Cordless Combination Hammers
					W
		*1 Model numbers for North and Central American countries
CONCEPT AND MAIN APPLICATIONS						H
These 36V cordless combination hammers have been developed based on
Models BHR261 and BHR261T, and feature compatibility with both
Makita 36V-2.6Ah Li-ion battery BL3626 and 36V-2.2Ah Li-ion battery
BL3622A.
(Note: BHR261 and BHR261T run on only 36V-2.6Ah battery BL3626.)
Other features are exactly the same as BHR261 and BHR261T as follows:				Dimensions: mm (")
• 3 operation modes (rotation only/ rotation with hammering/ hammering only)					HR262D/	HR262TD/
• Vibration absorbing handle and soft grips					BHR262	BHR262T
• Good tool-balance due to the center of gravity closer to handle				Length (L)	363 (14-1/4)	387 (15-1/4)
HR262TD/BHR262T (HRH02/HRH02C*1) are equipped with				Width (W)	104 (4-1/8)
quick change chuck.				Height (H)	235 (9-1/4)
These new products are available in the variations listed in the next page.
Specification
			HR262D/ BHR262	HR262TD/ BHR262T
			(HRH01C/ HRH01)*1	(HRH02C/ HRH02)*1
	Voltage: V			36
	Capacity: Ah			2.2/ 2.6
Battery	Cell			Li-ion
	Energy capacity: Wh			80/ 94
	Charging Time: min.		60 with DC36WA/ 22 with DC36RA
No load speed: min.ˉ¹ = rpm				0 - 1,200
Impacts per minute= min.ˉ¹				0 - 4,800
Max. output (W)				500
Chuck type			Adapted for	Adapted for SDS-PLUS bits
			SDS-PLUS bits	and Round shank bits*2
		Concrete
				26 (1)
Capacity: mm (")		Steel		13 (1/2)
		Wood		32 (1-1/4)
Operation mode				3 modes
			(Rotation only/ Rotation with hammering/ Hammering only)
Variable speed control			Yes (by trigger)
Reverse switch				Yes
Torque limiter				Yes
LED job light				Yes
Weight according to			4.5 (9.9)		4.8 (10.6)
EPTA-Procedure 01/2003*3: kg (lbs)

*2 Round shank bits can also be used by replacing the factory-mounted chuck with Quick change drill chuck (keyless). *3 with Battery and Side grip

Standard equipment
Grip assembly	1
Depth gauge (Stopper pole) ...	1
Quick change drill chuck	1
(for HR262TD/BHR262T,
HRH02/HRH02C*1)
Bit grease ...............................(for some country)	1
Waste cloth(for............................some country)	1

Note: The standard equipment for the tool shown above may vary by country.

Optional accessories

SDS-PLUS bits	Dust cup 9	Grooving chisels
Taper shank TCT bits	Dust extractor attachment	Bull points
Taper shank adapter	Grease vessel 30g	Scaling chisels
Cotter	Hose	Fast charger DC36RA
Grip drill	Joint 25	Battery BL3626
Grip drill holder	Bit grease	Charger DC36WA
Drill chuck assembly	Plastic carrying case	Battery BL3622A
Chuck adapter	Depth gauge (Stopper pole)	Battery adapter BAP36N
Drill chuck S13	Blow out bulb	Battery converter BCV01
Chuck key S13	Cold chisels	Battery converter BCV02
SDS-Plus hammer chuck set	Keyless drill chuck	Side grip set
Scraper assembly	Safety goggles	Grip base set
Dust cup 5	Dust cup