Jura Capresso 601, S9 Programming automatic switch on time, Programming automatic switch off time

Models: 601 S95 S9 S90

1 22
Download 22 pages 22.61 Kb
Page 15
Image 15
13.10 Programming automatic switch on time

13.10 Programming automatic switch on time

A programming of the timer clock is necessary if an automatic switch on is needed.

13.11 Programming automatic switch off time UNIT ON —.—

Press key P .

By briefly pressing key + or - you can set the hours and then confirm by pressing key P .

By briefly pressing key + or - you can set the minutes and then confirm by pressing key P .

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

To switch off the automatic timer proceed as follows: Press key P

Press key N

13.12 Cup counter UNIT ON —:—

13.11 Programming automatic switch off time

13.13 Programming language selection OFF AFTER 5.0 HOURS

Press key P

By briefly pressing key + or - you can set the hours and then confirm by pressing key P (0.5 to 9.0 hours).

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.12 Cup counter

13.14 Program key N 200 SUPPLIED (TOTAL SUPPLIED)

To obtain the information press the required key. The display will show you the number of times the function has been chosen.

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

It is not possible to call up hot water and steam supplies.

13.13 Programming language selection

Press key P

By briefly pressing key + or - call up the language desired and then confirm by pressing key P .

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.14 Program key N

By using key N you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, tea portion) to their original standard settings.

14. Care and maintenance COFFEE READY

 Press key

N until you can hear an acoustic signal.

E

 

If a mistake occurs while programming one of the above settings, just press key N and the chosen setting moves back to its original standard setting.

14. Care and maintenance

14.1 Fill water

Manual background FILL WATER

If this message shows on the display no more coffee can be drawn off. Top up water.

The water tank should be rinsed and filled with fresh water daily. Only use fresh, cold water. Never top up with milk, mineral water or any other liquids. You can top up water without removing tank.

15

Page 15
Image 15
Jura Capresso 601 Programming automatic switch on time, Programming automatic switch off time, Cup counter, Program key N