14.9 General cleaning instructions
Never use abrasive articles or corrosive chemicals to clean your machine.
Wipe down the casing inside and out using a soft, damp cloth.
Clean the pivoting nozzle after every use.
After warming milk, draw off some hot water to clean the pivoting nozzle inside.
You can take off the
The water tank should be rinsed and filled with clean water daily.
If you notice any furring in the water tank, this can be de- calcified separately with a customary decalcifying agent. Remove the tank from the machine for this purpose.
If a Claris filter cartridge is used, remove it beforehand.
14.10 Regular servicing
Regular Jura services ensure your machine‘s reliability and longer life. Keep the original packaging to protect the machine while being transported.
14.11 Empty system
This procedure is necessary to prevent your machine from frost damage while being transported.
Put a container under the pivoting nozzle (20).
Press selector key 
and remove water tank
STEAM INTAKE
PRESS STEAM / FILL SYSTEM
Switch off machine by pressing ON/OFF key 
.
15. Cleaning
The machine has an integrated cleaning program. The procedure lasts about 15 minutes.
Please use Jura cleaning tablets only. These are available from your Jura dealer.
It is essential not to interrupt the process once it has been started.
Switch on your machine by pressing ON/OFF 
key
Press key 
until you can hear an acoustic signal.
EMPTY TRAY (FILL WATER might show as well)
Put a sufficiently large container under the
ADD TABLET (Fig. 9) / PRESS CLEANING |
| ||
UNIT CLEANING / PLEASE WAIT | E | ||
EMPTY TRAY | |||
|
PLEASE WAIT
RINSE UNIT
COFFEE READY
The powder funnel for
16. Decalcifying
Your machine has an integrated decalcifying program. It lasts approx. 50 minutes.
Please use Jura decalcifying tablets only. These are available from your Jura dealer.
17
