Jura Capresso S90, S95, 601 manual Programming powder quantity, Programming coffee temperature

13.1 Programming powder quantity

Switch the machine on by pressing ON/OFF key .

Press key P until you can hear an acoustic signal.

 POWDER QUANTITY / SELECT KEY

Now press the key that you want to programme. Use the key for 1 cup only. The corresponding quantity for 2 cups is adjusted automatically by the machine after programming is finished.

 POWDER

-·········· II ·········· +

The powder quantity can be selected by pressing keys + or - briefly.

To store the new powder quantity in memory briefly press key P .

 POWDER QUANTITY / SELECT KEY.

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.2 Programming coffee temperature

 TEMPERATURE COFFEE / SELECT KEY

Now press the key that you want to programme.

Select the required temperature (high or normal) by activating key + or - .

To store the new coffee temperature in memory briefly press key

P.

 TEMPERATURE COFFEE / SELECT KEY

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.3 Programming water quantity

 WATER QUANTITY / SELECT KEY

Put a cup under the coffee-spout (15) and then press the key that you want to programme.

 The selected value is confirmed

Now your machine prepares a coffee.

 ENOUGH COFFEE? / PRESS KEY P

 OK? P - ·········· II ·········· +

When the required water quantity is reached press key P . You can call up the next setting by pressing key + .

There is an additional possibility to alter the water quantity

anew. Press key + or - for this purpose.

If you wish to draw another coffee to control the water quantity, press key again otherwise press key P briefly to store water quantity in memory.

By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.4 Programming steam portion

	STEAM PORTION		E
 Press key	P .
	PORTION /....20 SEC.
 By pressing key		+ or - you can programme time in seconds
(drawing off time of 3 – 250 sec.)
 Press key	P .
	STEAM PORTION
 By pressing the		+ button, you can select the next phase, or
press the	N button in order to leave the programming.

13.5 Programming tea portion

Place a cup under the height-adjustable tea-spout (22).

Press key P .

 OPEN TAP

 ENOUGH TEA? / CLOSE TAP

 TEA PORTION

13