| Cause | Action |
|
|
|
CLEAN UNIT | You have drawn off coffee 220 times or run | Clean as described in chapter 14 |
| the rinsing program 180 times |
|
Message still displayed, although machine cleaned
Run cleaning program again; this time do not add cleaning tablet
UNIT CALCED | The espresso/coffee machine sector needs | Run decalcifying program as described in |
| decalcifying | chapter 15 |
| Message still displayed, although machine | Run cleaning program again; this time using water |
| decalcified | only and without decalcifying agent |
|
|
|
FAULT 2 | Temperature too low | – Switch device off |
|
| – Leave device for approx. 2 hours at room |
|
| temperature |
|
| – Switch device on |
|
|
|
FAULT 8 | Initialisation problem | Switch device off, disconnect from mains, |
|
| switch on |
|
|
|
E
20. Problems
Problem | Cause | Action |
|
|
|
Coffee only flows in dribs | – Powder too fine | – Adjust grinder to a coarser grinding |
and drabs while drawing off |
| – Run the rinsing programme once or twice. |
|
| |
|
| – If the problem persists, run cleaning programme |
|
|
|
Coffee flow is stopped | – Not enough coffee powder in the system | – Draw off one cup of coffee |
after |
|
|
|
|
|
Grinder is extremely noisy | – Foreign element in grinder | – Proceed as described in chapter 13.5 |
21
