JVC 0205MKH-VT-VT manual PC Picture Menu, PIP Picture

Auto Position

If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.

•Select Auto position item by using “ ” or “” buttons.

•Press “OK” button.

•Press “MENU” button or “BACK” button to store the value.

Warning: Auto position adjustment recom- mended to be done with the full screen im- age for the proper adjustment.

Horizontal Position

This item shifts the image horizontally to right hand side or left hand side of the screen.

•Select Hor. Position item by using “ ” or “ ” button.

•Use “” or “” button to adjust the value.

•Press “MENU” button or “BACK” button to store the value.

Vertical Position

This item shifts the image vertically towards the top or bottom of the screen.

•Select Ver. Position item by using “ ” or “ ” button.

•Use “” or “” button to adjust the value.

•Press “MENU” button or “BACK” button to store the value.

Dot Clock

Dot Clock adjustments correct interference that appear as vertical banding in dot inten- sive presentations like spreadsheets or paragraphs or text in smaller fonts.

•Use “” or “” button to adjust the value. Clock Phase

Depending on the resolution and scan fre- quency that you input to the TV Set, you may see a muddy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

• Use “” or “” button to adjust the value.

PC Picture Menu

In the Main menu, select “PC Picture” using “” or “ ” button, then enter the PC Picture

menu by pressing “” / “” or “OK” buttons.

Contrast, Bright-1 and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu.

R, G, and B adjust the TV image colour in PC mode. You can change the TV colour to your desired colour: R (Red), G (Green), B (Blue)

Sound Menu

In the main menu select “Sound” using “ ” or “ ” button then enter the Sound menu by

pressing “” / “” or “OK” buttons.

The items in this menu are described at Sound menu starting page 29.

PIP Picture

In the Main menu, select “PIP Picture” using “ ” or “ ” button, then enter the PIP Pic-

ture menu by pressing ““ / “” or “OK” buttons.

This menu is displayed when PIP is dis- played on the screen. Otherwise “PIP No Signal” message will be displayed at the bottom of menu.

￿￿￿￿￿￿￿￿￿￿￿￿

PIP picture is displayed on the screen by “” button.

- 36 -