JVC 0205MKH-VT-VT manual Setting Bright-2Only for 17D50BK

Setting Sharpness

•Using “ ” or “ ” button select Sharpness.

•Press “ ” button to increase sharpness level.

•Press “ ” button to decrease sharpness level.

Setting Colour

• Using “	” or “ ” button select Colour.
• Press “ ” button to increase colour level.
• Press “	” button to decrease colour level.

Setting Bright-2(Only for 17D50BK)

Using“	” or “ ” button select Bright-2.
• Press “ ” button to increase the back light.
• Press “	” button to decrease the back light.

Setting Colour Temp.

•Using “ ” or “ ” button select Colour Temp.

•Press “ ” or “ ” button to select “Warm”, “Cool” or “Normal”.

Setting Noise Reduction

•Using “ ” or “ ” button select Noise Re- duction.

•Press “” or “” button to select Noise Re- duction level “Off” or “Minimum” or “Me- dium” or “Maximum”.

Note 1:

At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effective at once.

Note 2:

At moving pictures, while Noise Reduction is at maximum level, some picture distortions may occur. If Noise Reduc-

tion is set to medium or minimum, the picture will improve.

Setting Hue

During Playback NTSC system, this will ap- pear in AV mode only when NTSC video source is applied. Otherwise, HUE option is invisible in Picture menu in TV mode :

•Using “ ” or “ ” button select Hue.

•Press “” button to increase hue level.

•Press “” button to decrease hue level. Center value is indicated with one arrow.

Reset

Press BLUE button to reset the picture modes to factory default settings.

To Store the Settings

In the Picture Menu, all settings are stored automatically.

- 28 -