- 40 -

Via the RCA jacks

If you have an equipment (such as a Cam-
corder) which has the RCA jacks, connect it
to the EXT-4 terminal with the video and au-
dio cables.
If you have a device which outputs compo-
nent signal, connect it to the EXT-3 terminal
with a component video cable.
Via the ANT (aerial) socket
If your equipment does not have an Euro-
connector or RCA jacks, connect it to the TV
with an aerial cable. For details, see the
manual provided with the equipment.
 To store the test signal that comes from the
equipment, see Install Menu on page 30
and store it to the program number 0. You
can watch images from that equipment to
select the program number which you
stored the test signal.
Decoder
Cable TV offers you a wide choice of
programmes. Most of them are free, others
are to be paid for by the viewer. This means
that you will need to subscribe to the broad-
casting organisation whose programmes
you wish to receive. This organisation will
supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
 Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
 Connect the decoder to your TV with a
eurocable (RCA Jack Cable) to EXTERNAL
(RCA Jack). When your decoder has a
Euroconnector / RCA Jack you can obtain
better picture quality if you connect a
eurocable (RCA Jack Cable) to EXTERNAL
(RCA Jack).
TV and Video Recoder (VCR)
 Connect the Video Recorder to the ANT (an-
tenna input) socket of the TV with the aerial
cable.
 Connect the Video Recorder to the EXT-1 or
EXT-2 terminal with the SCART cable, or
connect it to the EXT-4 terminal with the audio
and video cables.
NTSC Playback
Connect a NTSC video recorder to a termi-
nal. Then press AV button to select the cor-
responding AV mode.
INTSC 3.58/4.43 system is detected auto-
matically in AV mode.
Camera and Camcorder
To connect to the EXT-4 terminal
Connect your camera or camcorder at the
back side of your TV.
 Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You should connect the jacks to the
input in the same colour.
Connect the decoder to the videorecorder
Some video recorders have a special euro-
connector for decoder.
 Connect a eurocable to the euroconnector of
your decoder and to the special eurocon-
nector of your video recorder. See also the
handbook of your video recorder.
 To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket on the
right side of your TV, to connect head-
phones.
ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65 24.02.2005, 08:2040