JVC AV-21MS15, AV-29MS15 Customized setting, VIDEO-2 Setting, Setup Tour, Display

Customized setting (continued)

VIDEO-2 SETTING

You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal.

Select the VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT).

❇MENU INSTALL menu VIDEO-2 SETTING

VIDEO	If a normal video signal (composite video signal) is input.
COMPONENT	If a component video signal (Y/CB/CR) is input.

You must choose a setting follow as signal that you input to VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must choose VIDEO-2 SETTING to VIDEO.)

For connecting methods, see “Additional Preparation” on page 20.

SETUP TOUR

You may use the SETUP TOUR function to perform the initial setting.

When selecting SETUP TOUR, the LANGUAGE menu, AUTO PROGRAM menu, and EDIT menu will be displayed as shown on page 8. But “SETUP TOUR RESTART?” will not be displayed.

Select SETUP TOUR in the INSTALL menu.

❇ MENU INSTALL menu SETUP TOUR

DISPLAY

You can display the programme number, video terminal number and PR list on the screen.

Press the DISPLAY button to select the desired mode:

ON OFF PR LIST

Choose a TV channel or a VIDEO terminal.

1Press the DISPLAY button to display the PR LIST.

2Select a programme number or video terminal by pressing the 5/∞ button to move up/down on the programme number or press the 2/3 button to skip for each 7 programme numbers, then press MENU/OK button.

PR LIST

PR			CH/CC
V1
V2
V3
AV
	1	■	CH 09
2		■	CC 76
3		■	CC 78
			MENU : OK
-7			+7

❇About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

16