JVC AV-28GT1BJF, AV-28GT1SJF manual Picture Menu

Setting Balance:

•Using ““ or “” button select Balance.

•Press “” button to change balance rightward.

•Press “” button+<3(5%75(%/(9280($66/to$1&(change￿6281'balance21￿leftward.

Hyper Sound:

You can use this feature to switch on or off Hyper Sound. Pressing “” or “” button will turn on or off this feature. If the current sound system is MONO and the Hyper Sound is set ON, then the sound will be heard as if it is STEREO. If the current sound system is STEREO, switching Hyper Sound on will make the sound deeper. Switching it off will make no

change in MONO+<3(5%75(%/(9280($and66/$1&(￿6281'STEREO. 21￿

Hyper Sound can be set On or Off also by GREEN button.

Picture Menu

To change picture settings:

•Press “MENU” button, now you are in main menu. In the

main menu, select PICTURE using ““ or “” button, then enter the picture menu,16352*5)(6281',&($785($//pressing￿￿￿￿￿￿$0￿￿￿ “” or “” button.

Note: When Picture Mode is not “MANUAL”, BRIGHTNESS, CONTRAST and COLOUR options can not be reached by

““ or “” buttons.

Factory Settings:

In the Picture Menu if you press the YELLOW button the ad- justments switches themselves to the factory settings.

Setting Brightness:

You can change Brightness only when Picture Mode is se- lected MANUAL.

Using ““ or “” button select Brightness.

•Press “” button to increase Brightness.

•Press “” button to decrease Brightness.

Setting Contrast:

You can change Contrast only when Picture Mode is select- ed MANUAL.

•Using ““ or “” button select Contrast.

•Press “” button to increase Contrast level.

•Press “” button to decrease Contrast level.

Setting Colour:

You can change Colour only when Picture Mode is selected

MANUAL.

•Using ““ or “” button select Colour.

•Press “” button to increase Colour level.

•Press “” button to decrease Colour level.

Setting Sharpness:

•Using ““ or “” button select Sharpness.

•Press “” button to increase Sharpness level.

•Press “” button to decrease Sharpness level.

Setting Hue (In AV mode only) :

•Using ““ or “” button select Hue.

•Press “” button to increase Hue level.

•Press “” button to decrease Hue level.

Hue adjust is functional only when NTSC 3.58/4.43 is applied in AV mode. It does not appear when other colour systems used.

Setting VCR Mode (In AV mode only) :

•Using ““ or “” button select VCR MODE.

•When you watch a picture from your VCR and the picture is unstable, you may improve it by changing the "VCR MODE" setting from "ON" to "OFF".

ENGLISH - 8 -