JVC AV-32T5SK, AV-32T5BK, AV-28T5SK, AV-28T5BK, AV-32T5SR, AV-32T5BR, AV-28T5SR, AV-28T5BR Button

SET UP menu

5Press the green or red button repeatedly until the TV channel you want appears

If the TV channel reception is poor:

Press the blue or yellow button to fine- tune the TV channel.

If you cannot hear the normal sound even when the picture of the TV channel appears normally:

The SYSTEM setting is wrong. Press the 3button and choose a SYSTEM that has normal sound.

6Press the a button and register the TV channel to a Programme number (PR)

The normal EDIT menu is resumed.

LANGUAGE

The LANGUAGE setting which was performed in the “Initial settings” (page 5) can be changed.

1Choose LANGUAGE, then press the a or 3 button

A sub-menu of the LANGUAGE function appears.

DECODER (EXT-2)

When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT-

2)function to unscramble the scrambled TV channels.

1Turn on the Decoder power

2Display the TV channel capable of being unscrambled with the Decoder on the TV

Even if the Decoder is functioning, a scrambled picture appears at this time.

3Display the SET UP menu and choose DECODER (EXT-2)

SET UP

AUTO PROGRAM

EDIT/MANUAL

LANGUAGE

DECODER(EXT-2) OFF

EXT SETTING

PICTURE TILT

TV OK

D0029-EN

4Press the 5 buttons to choose

ON

An unscrambled picture appears.

ENGLISH

LANGUAGE		To cancel the DECODER (EXT-2)
		function:
		Press the 5buttons to choose OFF.
TV	OK	5 Press the a button to complete
D1002(E)-EN		the setting

The T-V LINK menu appears.

2 Press the 5 and 6 buttons to
	T-V LINK
choose a language. Then press the	DOWNLOAD TV	RECORDING DEVICE
a button
	TV OK EXIT
	D0005-EN
	You can send the programme numbers
	data to a VCR with the T-V LINK
	function.

29