30
SET UP menu
AV-32/28T5SP / LCT1795-001A-U / English
6 Turn on the VCR, and then press
the a button to transmit the data
to VCR
The T-V LINKmenu disappears once the
data transmission ends.
7 If you have another TV channel
capable of being unscrambled with
a Decoder, repeat steps 2 through 6
If for some reason the DECODER (EXT-
2) function has been set to “ON” but the
TV channel cannot be unscrambled, check
the following:
• Has the Decoder been connected to the
VCR properly according to the VCR
and Decoder Instruction Manuals?
• Has the Decoder power been turned
on?
• Can the TV channel be unscrambled
with a Decoder?
• Is it necessary to change the VCR
settings in order to connect the
Decoder? Confirm that the VCR is set
properly by rechecking the VCR
Instruction Manual.
EXT SETTING
1 Choose EXT SETTING, then press
the a or 3 button
The EXT SETTING menu appears.
2 Follow the operation description of
a function you want to use and
operate the function
y:
You can enjoy high-quality picture of the
2 S-VIDEO signal (Y/C signal).
ID LIST:
You can have a name corresponding to
the devices connected for each EXT
terminal.
DUBBING:
You can choose a signal source to be
output from an EXT-2 terminal.

y (S-VIDEO input)

When connecting a device (such as S-VHS
VCR) which enables an S-VIDEO signal (Y/
C signal) to be output, you can enjoy high-
quality picture of the S-VIDEO signal (Y/C
signal).
Preparation:
• At first, read the Device Instruction
Manual and “Additional preparation” on
page 33 to connect the device to the TV
properly. Second, follow the Device
Instruction Manual to set the device so
that an S-VIDEO signal (Y/C signal) can
be output to the TV.
• Do not set y (S-VIDEO input) to the
EXT terminal connected to a device
which cannot output an S-VIDEO (Y/C
signal). If it is set wrongly, a picture
cannot appear.
1 Press the 5 or 6 buttons to
choose an EXT terminal
D0020-EN
EXT-1
DUBBING
EXT-2
EXT-4
TV
EXT SETTING
TV OK ID LIST
EXT-3
S-IN
D0020-EN
EXT-1
DUBBING
EXT-2
EXT-4
TV
EXT SETTING
TV OK ID LIST
EXT-3
S-IN
AV-32&28T5SP_Eng.book Page 30 Wednesday, December 22, 2004 9:38 AM