JVC AV-P950U manual Rear panel, Mode, Remote, EXT Input, RGB OUTPUT1, RGB OUTPUT2

Rear panel

MODE

					Use to set the RGB output picture mode or sync signal
				A B C D E F	mode. Set it according	to	the specifications of the
• All switches are			1		connected projector or display.
			0
factory-set to “1”.					Preview mode setting	1	....	OFF
							....
					(see page 14)	0		ON
Mode setting for the RGB					Menu display setting	1	....	Display
							....
output picture						0		No display
	........	A B			• If No Display is selected for the MENU Display setting
XGA (1024 X 768)		1	1
					while the PREVIEW mode setting is ON, this setting will be
	........
SVGA (800 X 600)		0	1
					applicable only with the RGB output pictures.
	........
VGA (640 X 480)		0	0
							....
					Setting of sync signal for	1		NO (not added)
• When using either SVGA or VGA mode,
							....
					G signal from RGB OUTPUT	0		YES (added)
the picture quality will be slightly inferior
							.... Horizontal sync signal
to that of XGA mode.					Mode setting for sync	1
					signal from RGB OUTPUT	0	....	Composite sync signal

REMOTE IN

Use to control the unit from a personal computer via RS-232C(see page 16).

REMOTE INPUT (RS-232C)

A B C D E F

1

0

DC OUTPUT

DC12V 400mA

MODE

EXT INPUT RGB OUTPUT 1 RGB OUTPUT 2

EXT INPUT

Input RGB signals such as video signal from a personal computer, or sync signal.

Use to input RGB signals such as video signals from a personal computer, and sync signals. Select the picture to be shown instead of the camera picture using the EXT IN button of SOURCE SELECT on the control panel.

•Input signals will be transferred directly to RGB OUTPUT 1 and RGB OUTPUT 2, regardless of the picture mode settings of RGB OUTPUT on this unit.

•Set the signal of the equipment connected to the EXT INPUT connector according to the specifications of the connected projector or display.

RGB OUTPUT1, RGB OUTPUT2

RGB OUTPUT1, RGB OUTPUT2

Outputs camera pictures or signals from EXT INPUT.

8