JVC AV 32320 manual Cable/Satellite Search Codes Function, VCR Search Codes Function

AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 53

Search Codes

NOTE: Except for AV-36320 and AV-32320

Cable/Satellite Search Codes Function:

1)Slide the first 2-Way Mode Selector switch to CATV.

2)Press the TV POWER and RETURN+ buttons. Hold for at least three seconds and release.

3)Press TV POWER, see if the CATV or Satellite box responds.

4)If there was a response, press RETURN+. The operating codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use

the remote control which came with the equipment.

5) Press RETURN+ to exit.

VCR Search Codes Function:

1)Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.

2)Press the VCR POWER and RETURN+ buttons. Hold for at least three seconds and release.

3)Press VCR POWER, see if the VCR responds.

4)If there was a response, press RETURN+. The operating codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use

the

manufacturers remote control which came with the VCR.

5) Press RETURN+ to exit.

DVD Player Search Codes Function:

1)Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.

2)Press the DVD POWER and RETURN+ buttons. Hold for at least three seconds and release.

3)Press DVD POWER, see if the DVD player responds.

4)If there was a response, press RETURN+. The operating codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use the manufacturers remote control which came with the DVD player.

5)Press RETURN+ to exit.

53