|
|
| Troubleshooting | |
|
|
| ||
|
|
|
|
|
| PROBLEMS |
| CHECK |
|
| There is no power | • See if the power cord became unplugged. |
| |
|
| • Check for a blown fuse or circuit breaker or a power outage. |
| |
|
|
|
| |
| There is no picture | • The antenna could be disconnected. |
| |
| or sound | • The input mode could be set improperly. See page 45. |
| |
|
| • The tuner (Auto Tuner Setup) could be set improperly. See page 25. |
| |
|
| • The TV station may be having difficulties. Check to see if other stations are working. |
| |
|
|
|
| |
| Remote control is not | • Check to see that the batteries are still working and properly installed. |
| |
| operating properly or | • Make sure the remote has a clear sight path to the TV. |
| |
| at all | • Check that the TV/CATV switch is in the proper position. |
| |
|
| • You may be too far from the TV. You must be within 23 feet (7 meters). |
| |
|
|
|
| |
| You cannot select a | • Make sure the channels have been programmed. See "Channel Summary", page 28. |
| |
| certain channel | • Check to see if the channel is locked. See "Channel Summary - Lock" page 28. |
| |
|
|
|
| |
| The power turns off | • Make sure the set did not become unplugged. |
| |
| by itself | • Perhaps the On/Off Timer is set. See page 40. |
| |
|
| • Check to see if the Sleep Timer was set. See page 44. |
| |
|
|
|
| |
| The clock is wrong | • The power was interrupted and the clock was not reset. See page 26. |
| |
|
|
|
| |
| The On Timer is | • There is a problem with the TV. Unplug the set and call for service. |
| |
| blinking |
|
|
|
|
|
|
| |
| The color quality | • Tint and Color may be improperly adjusted. See page 37. |
| |
| is poor | • The Video Status mode may be turned to the wrong setting. See page 44. |
| |
|
|
|
| |
| There are lines | • There could be interference from another electrical appliance, such as a computer, |
| |
| across the picture | another TV or VCR. Move any such appliances further away from the TV. |
| |
|
|
|
| |
| The picture is spotted | • There could be interference from a |
| |
|
| operating nearby. Move the antenna away from the appliance or change to a coaxial |
| |
|
| cable connection which is less prone to interference. |
| |
|
|
|
| |
| There are double | • A building or passing airplane can reflect the original signal and produce a second, |
| |
| pictures (ghosts) | slightly delayed one. Adjust your antenna position. |
| |
|
|
|
| |
| Picture is snowy | • Your antenna may be damaged, disconnected or turned. Check the antenna |
| |
| (image noise) | connection. If the antenna is damaged, replace it. |
| |
|
|
|
| |
| Screen is 40% black | • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 41. |
| |
|
|
|
| |
| Stereo or bilingual | • Make sure the MTS settings are correct. See "MTS" on page 39. |
| |
| programs can't be |
|
|
|
| heard |
|
|
|
|
|
|
| |
| There is no picture | • Check your AV Cables to make sure they are connected tightly and properly. |
| |
| being displayed for | • In case you are connecting using component cables to V2, make sure in the onscreen |
| |
| V2 | menu system, you have "YES" selected for the V2 |
| |
|
| See page 17 and 42. |
| |
|
| • In case you are connecting using composite cables to V2, make sure you have 'NO" |
| |
|
| selected for the V2 |
| |
|
| * |
| |
|
|
|
| |
| Static electricity | • It is normal to feel static electricity if you brush or touch the screen. |
| |
|
|
|
| |
| You hear occasional | • It is normal for the TV to make crackling sounds when first turned on or off. Unless |
| |
| crackling sounds | the sound or picture become abnormal, this is fine. |
| |
|
|
|
|
|
49
