JVC AV 36P903 manual Set Lock Code, Select by Exit by Exit Operate by

V-Chip

Set Lock Code

Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set with a Lock Code of "0000". You may change the code to any four-digit number you wish. To change the Lock Code, follow the steps below.

Press the MENU button

To SET LOCK CODE

To operate

The lock icon appears

Press ZERO to access the Lock Code

SET LOCK CODE

LOCK CODE 0000

	FINISH
SELECT BY	EXIT BY EXIT
OPERATE BY

The first digit will be highlighted

To select the number

To move to the next digit

Continue to follow these directions for all four numbers

To FINISH

To save settings and exit

Your Lock Code is now set.

NOTE:

•After a power interruption you must reset the Lock Code.

•Write your Lock Code number down and keep it hidden from potential viewers.

•If you forget the Lock Code, a new code may be set using the steps listed above.

36