Connections

Connecting to Cable or an Antenna

There are three basic types of antenna or cable connections:

If you have an antenna or have a cable system that does not require you use a cable box to select channels, please refer to Diagram #1.

If you have a cable system that requires the use of a cable box to access all the channels, please refer to Diagram #2.

If you have a cable system that requires the use of a cable box to access certain premium channels, but not “basic” cable channels, please refer to Diagram #3.

For your convenience, connection to a VCR is also shown in the following diagrams. A VCR is not necessary for operation of the television or Picture-In-Picture (PIP) function. You may omit the VCR from your connections if you wish.

For instructions on connecting a VCR only, please see the Quick Setup on page 11.

For information on using PIP, please see page 52.

Diagram #1

Cable/RF connector

1) Connect an RF Cable from the wall outlet into the RF Cable In on the back of the TV.

Connecting to a Cable Box

Diagram #2

1)Connect an RF Cable from the wall outlet into the RF Cable In on the Cable Box.

2)Connect an RF cable from the Cable Out on the cable box into the RF Cable In on the back of the TV.

NOTE:

• Please see page 52 for more information on using the PIP feature with a cable box.

13

Page 13
Image 13
JVC AV 36P903 manual Connections, Connecting to Cable or an Antenna, Connecting to a Cable Box, Diagram #1, Diagram #2