Appendix 1- Screen Shield 37

The Screen Shield provides a layer of protection for your television screen. It has a subtle tint which enhances picture contrast. The screen shield comes installed on your D-Series projection television. You can remove the screen shield if you prefer.

To Remove the Screen Shield:

To begin removal of the screen shield, remove the top molding clip with a small flat head screwdriver pressed into the opening at the upper corner of the television. (Illustration 1)

Remove the bottom molding clip by using a flat head screwdriver as in the previous step.

After loosening all four corners, gently press on the sides of the screen shield to bow the screen out towards you. (Illustration 2) It will pop out of position, pull gently towards you to remove it completely.

Store the screen shield carefully, in a safe place where it won’t become scratched or soiled. If you later decide you wish to reinstall the screen shield, do the following:

Insert the screen shield into the channel on the right side of the television.

Gently press on the sides of the screen shield to bow it out towards you. (Illustration 2) Be sure to keep the right side of the shield in the right-side channel. Carefully slide the left side of the shield into the channel on the left-side of the television.

Reinstall the two molding clips. Press the clips into place gently, do not force.

Wear cotton gloves when working with the screen

shield to guard against fingerprints.

Molding Clip

Illustration 1

Illustration 2

Page 37
Image 37
JVC AV 60D501 manual Appendix 1- Screen Shield, To Remove the Screen Shield