12 Getting Started

RM-C889

Changing the Batteries

Be sure to use only size AA batteries.

1

Push the tab on the remote's battery cover

 

and slide towards the bottom to remove it.

2

Insert two AA batteries (supplied), carefully

 

noting the "+" and "-" markings on the

 

batteries and on the remote control. To avoid

 

a potential short circuit, insert the "-" end first.

3

When batteries are installed, slide the back

 

cover into place (until it clicks into position).

If the remote control acts erratically, replace the batteries. Typical battery life is six months to one year.

• We recommend using alkaline batteries for longer battery life.

When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes for your VCR, Cable Box, and other devices may have to be reset (page 14-15).

• When using the remote, be within 20 feet of the television or other component.

• Do not drop the remote, or let it get wet or expose it to a heat source.

• When cleaning the remote use only a soft, damp cloth. Do not use harsh chemical cleaners.

For more information on your remote control’s many features, see pages 31 and 32 and your Quick Setup Guide.

Page 12
Image 12
JVC AV 60D501 manual RM-C889, Getting Started