JVC AV 60D501 manual VCR Connections

Connections 9

VCR Connections

Use the diagrams below to connect a VCR to your television. For an antenna or cable connection use Diagram #1. For stereo-sound connection of an Audio/Video device, use Diagram #2.

1

2

1)Connect the coaxial cable from the cable television outlet to the ANT-A input at the rear of the television.

2)Connect a coaxial cable from the CABLE LOOP OUT jack at the rear of the TV to the input jack on the back panel of the VCR.

3)Connect a coaxial cable out from the Output jack on the back panel of the VCR into the ANT-B jack at the rear of the television.

1)Connect a video cable from the Video Out jack on the back of the VCR to either the Video Input 1 or Video Input 2 jacks on the rear panel of the television.

2)Connect the red audio cable from the right Audio Output jack on the VCR to the right Audio Input jack at the rear of the television.

3)Connect the white audio cable from the left Audio Output of the VCR to the left Audio Input jack at the rear of the television.

S-Video Connection

To use the S-Video connections for your VCR, plug an S-Video cable into the output jack at the rear of the VCR. Plug the S-Video cable into one of the two S-Video inputs at the rear of the television.

•Use either the S-Video or RCA- type video cable connection, not both, from any one device.