28
V.IN/A.MONI A.OUT COUNTER
DV CTL
TC
UB
CH-1/2
CH-3/4
Y/C
(CPN)
LINE
L
R
MIX
MIX
PHONES MIC
REMOTE
LOCAL
EJECT
OPERATE
REC LEVEL
CH-2/4
CH-1/3
SHIFT
SET
SELECT
SHIFT
MENU
HOLD SHIFT A. DUB
ADVANCE PRESET
REW STOP FF
REC PLAY
PAUSE
ON/OFF
MENU
OVER
OVER
HMSF
AUDLOCK
SP
32k 48k
SLAVE PB NDF
SERVORF
DEW
AUTO OFF
HOLD
CH 2/4
CH 1/3
VIDEO CASSETTE RECORDER BR-DV600UA
dB4030 2010 0
7 PLAYBACK
[AUDIO OUTPUT] switch
[PLAY] button [FF] button
[PAUSE]
button
[REC] button
[STOP] button
[OPERATE]
button
[AUDIO MONITOR] switch

Playback preparation

1
Press the [OPERATE] button to turn the power ON.
2Insert the cassette into the cassette loading slot.
3Select the audio output channel.
Select output signals with the switch on the front panel or
menu switch.
5Selection with the switch on the front panel
Menu switch setting
No. 054 <SLIDE SW FUNCTION> ......... AUDIO
CH1 CH1 CH2
CH1/3 CH1/3 CH2/4
CH3 CH3 CH4
CH1/2 CH1 CH2
CH1/2/3/4 CH1/3 CH2/4
CH3/4 CH3 CH4
CH2 CH1 CH2
CH2/4 CH1/3 CH2/4
CH4 CH3 CH4
R
L
MIX
CH1/2
MIX
CH3/4
CH1/2
MIX
CH3/4
CH1/2
MIX
CH3/4
AUDIO switch Connector
MONITOR OUTPUT MONITOR OUT AUDIO OUT
CH1/3 CH2/4
* To switch video input signals, use the No. 108 <VIDEO INPUT SELECT>
menu switch.
5Selection with the menu switch
Menu switch setting
No. 054 <SLIDE SW FUNCTION> ......... VIDEO
CH1 CH1 CH2
CH1/3 CH1/3 CH2/4
CH3 CH3 CH4
CH2 CH1 CH2
CH2/4 CH1/3 CH2/4
CH4 CH3 CH4
CH1/2 CH1 CH2
CH1/2/3/4 CH1/3 CH2/4
CH3/4 CH3 CH4
R
L
MIX
CH1/2
MIX
CH3/4
CH1/2
MIX
CH3/4
CH1/2
MIX
CH3/4
Connector
MONITOR AUDIO OUT
OUT
CH1/3 CH2/4
Menu switch
No. 211
<AUDIO
MONITOR>
AUDIO
OUTPUT
switch
29

Repeat play

1Set the No. 311 <AUTO PLAY> and No. 312 <AUTO
REW> menu switches to ON.
See No. <311 AUTO PLAY> and No. 312 <AUTO
REW> on pages 21 to 22.
2Press the [PLAY] button to start playback.
At tape end, the tape is rewound automatically and
playback starts again. This operation repeats each time
the tape ends.
3To stop Repeat Play, press the [STOP] button.
Playback
1Press the [PLAY] button.
Video and audio signals are output from each output
connector. Other data recorded on the tape is read out
(time code, user bits, etc.)
2To stop playback, press the [STOP] button.
3To temporarily stop playback, press the [PAUSE]
button.
For fast-forward playback, press the [FF] button
during playback.
For fast reverse playback, press the [REW] button
during playback.
You can select whether or not to play sound during
fast-forward playback or fast reverse playback with the
No. 212 <AUDIO OUT AT SEARCH> ON/OFF setting.
Notes:
If audio dubbing is performed repeatedly on a short
section of the tape, there may be some noise when
this section is played back.
When a tape recorded on a consumer MiniDV VCR is
played back on this unit, the sound level may be low.
When the Pause mode continues for more than
5 minutes, the Stop mode is automatically engaged
to protect the tape. If tape remaining time is less
than 3 minutes or the unit is being used in a low-
temperature environment, the Stop mode is
engaged within about 3 minutes. The Stop mode is
also engaged automatically if slow playback
continues for more than 1 minute with the remote
controller or reverse slow playback continues for
more than 20 seconds.