Setting the Daily Timer
With this timer you can wake up to music from a CD, tape, your favourite radio program.
You can set the Daily Timer whether the Unit is on or off.
Procedure For Setting the Daily Timer
1. Press TIMER/CLOCK so that “DAILY” appears on the display.
The DAILY indicator flashes on the display.
•Each time you press the button, the timer setting indication changes as follows:
DAILY =ON TIME (flashes) =REC =ON TIME (flashes) =Clock setting =Cancelled (current source) =(back to the beginning)
Note: If the clock has not been set, even if TIMER/CLOCK is pressed you cannot select the Daily
Timer.
2. Press TIMER/CLOCK again.
After “ON TIME” flashes for 2 seconds, it switches to the
\
Flashing
3.Set the time you want the Unit to turn on.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET .
Then press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.
\ 
•After adjusting the minutes and pressing SET, “OFF TIME” flashes for two seconds and
4. Set the time you want the Unit to turn off.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET.
Then press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.
\
•When the
•To select the source to be played, press 4P. DOWN or ¢P. UP on the MULTI CONTROL until your choice is shown.
5.Select the source you want to listen to.
To use a CD as the source:
1.Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly until “- CD - -
2.Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the
CD disc number to be played and press SET .
If you press SET without selecting a disc, the last disc played by the Unit will be used.
3.Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the
CD track number to be played and press SET.
If you press SET without selecting a track, playback will start from the first track on the CD.
English
31
