JVC CA-D432TR Turning the Daily Timer On and Off, English, To use a Cassette Deck as the source

Models: CA-D452TR CA-D432TR

1 43
Download 43 pages 63.87 Kb
Page 36
Image 36
To use a Cassette Deck as the source:

English

To use the Tuner as the source (Possible only after presetting stations.):

1.To listen to FM, press 4P. DOWN or ¢P. UP on the MULTI CONTROL repeatedly until “TUNER FM” flashes and press SET.

To listen to AM, press 4P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly until “TUNER AM” flashes and press SET.

or

2.Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the station to be listened to as a preset channel and press SET.

To use a Cassette Deck as the source:

Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly until “TAPE” flashes on the display and press SET.

6.Setting the Volume Level.

Press 4P. DOWN or ¢P. UP on the MULTI CONTROL to adjust the volume.

VOL - 10: Sets the volume level to 10.

VOL - 15: Sets the volume level to 15.

VOL - 20: Sets the volume level to 20.

VOL - - -:Sets the volume to the last volume setting used.

7.Press SET.

The DAILY indicator stops flashing and remains lit. The on-time, off-time, playback source (including the disc number and track number if a CD source is selected), and volume level appears on the display Turn the power off if you made the timer settings with the power turned on.

A few seconds before the on-time, the Unit automatically turns on the power. When the on-time comes, playback starts using the selected source. A few seconds before the off-time, “OFF” flashes on the display. When the off-time comes, the power is automatically turned off.

If a button is pressed when the Daily Timer is operating, playback continues but the timer is can- celled.

Before turning off the Unit

If the source is a CD, make sure that there is a CD in the selected disc number.

If the source is a tape:

The tape in the deck corresponding to the Deck indicator mark is played. Make sure that there is a tape in the selected Cassette Deck.

Check that the tape direction is correct. This is important especially when Reverse Mode is off.

Set Reverse Mode on if you want to play both sides of the tape.

Select the Sound Mode if you want to listen using a Sound Mode effect.

To change the Daily Timer setting

To change the settings for the Daily Timer, repeat the setting procedure from the beginning.

Turning the Daily Timer On and Off ————————————

Once the Daily Timer has been set it will be activated at the same time every day until the setting is turned off.

To turn the Daily Timer off, press TIMER/CLOCK until “DAILY” appears on the display. Press CANCEL/DEMO. “OFF”appears on the display and the DAILY indicator goes out.

To turn the Daily Timer on again, press TIMER/CLOCK until “DAILY” appears on the display, then press SET. The Timer on-time, off-time, payback source (including the disc number and track number if a CD source is selected), and volume level appear on the display, and the DAILY indicator lights up.

32

Page 36
Image 36
JVC CA-D432TR Turning the Daily Timer On and Off, English, To use a Cassette Deck as the source, Setting the Volume Level