English
Common Operations
Turning On or Off the Power
To turn on the unit, press (orSTANDBY/ON on the remote control) so that the lamp on the button goes off.
To turn off the unit (on standby), press(or STANDBY/ON on the remote control) again so that the lamp on the button lights up.
•A little power is always consumed even while the unit is on standby.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power failure occurs
The clock is reset to “0:00” right away, while the tuner preset stations (see page 13) will be erased in a few days.
•Each time you press the button, the
Saving the Power Consumption while on Standby
You can save the power consumption while the unit is turned off (on standby).
• You can set Ecology Mode whether the unit is on or off.
On the unit ONLY:
To activate the Ecology Mode, press ECO. | ECO | |
“ECO” appears on the display for about 2 seconds |
| |
(and the demonstration is canceled if you have |
| |
pressed the button while the unit is off). |
| |
|
|
|
|
|
|
Canceling the Demonstration | To deactivate the Ecology Mode, press ECO again. | ||
| “NORMAL” appears on the display for about 2 seconds. | ||
| |||
When connecting the AC power cord into a wall outlet, the | |||
|
| ||
|
| ||
unit automatically starts the demonstration. |
|
|
To cancel the demonstration, press and hold CANCEL/DEMO until “DEMO OFF” appears on the display.
•To cancel only beep sounds during the demonstration, press BEEP ON/OFF on the remote control.
When you press other buttons
CANCEL / DEMO
BEEP
ON/OFF
•Each time you press the button, “ECO” and “NORMAL” appear alternately on the display.
When you turn off the unit with Ecology Mode activated
“ECO” flashes on the display, and the clock time will not be shown while the unit is turned off.
The demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) unless you cancel it by pressing CANCEL/DEMO.
To start the demonstration manually
Press and hold CANCEL/DEMO again until “DEMO START” appears on the display.
Turning On or Off the Key-touch Tone
If you do not want the
On the remote control ONLY:
Press BEEP ON/OFF. | ON/OFF | |
|
| BEEP |
|
|
|
|
|
|
Selecting the Sources
To listen to the FM/AM broadcasts, press FM/AM.(See page 13.)
To play back discs, press CD 3¥8. (See pages 14 – 18.) To play back tapes, press TAPE 2 3. (See page 19.)
To select the external equipment as the source, press AUX.
FM / AM | CD | TAPE | AUX |
|
|
When you press the play button for a particular source (FM/AM, CD 3/8, TAPE 2 3, and AUX), the unit turns on and the unit starts playing the source if it is ready.
9