JVC CA-HXZ9 manual Synchronized Recording, Load a disc Select a disc, Press CD REC Start

English

Synchronized Recording

By using the Synchronized Recording method, everything on the disc goes onto the tape in the same order as it is on the disc, or according to the order you have set in Program Play. You can start or stop both disc play and tape recording at the same time.

On the unit ONLY:

1 Press 0EJECT and insert a recordable cassette with the exposed part of the tape down.

2	Load a disc.
3	Select a disc.
	Press the corresponding disc number	CD3
	(CD1, CD2, or CD3) button where a	CD2
	disc is loaded in step 2, then press 7.	CD1

4 Press CD REC START.	CD REC
	START

“CD REC” appears on the display and the REC (recording) lamp flashes when recording starts.

The cassette deck starts recording while the CD player starts playing.

When the recording is done, “CD REC FINISHED” appears scrolling on the display, and the REC (recording) lamp turns off. Both the cassette deck and the CD player stop automatically.

To stop recording, press 7 to create a 4-second blank portion on the recording tape. (Remember, a 4-second blank is important when using Music Scan—see page 19.)

To remove the cassette, press 0 EJECT to open the cassette holder only while the tape is not running.

To record on both sides—Reverse Mode

On the unit ONLY:

Press REVERSE MODE so that the Reverse Mode REVERSE

MODE

indicator lights up on the display like— .

•When using the Reverse Mode for Synchronized Recording, start recording in the

forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be re-recorded at the beginning of the reverse side (2).

If you start recording on the reverse side (2) first, recording will stop when only one side (reverse) of the tape is recorded.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up on the display like— .

21