Continued
English
Programming the Playing Order of the Tracks
You can arrange the playing order of the tracks before you start playing. You can program up to 32 tracks.
•To use Repeat Play (see page 18) for Program Play, press REPEAT after starting Program Play. Only REPEAT 1 and REPEAT ALL can be selected for Program Play.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1 Load discs.
•If the current playing source is not the CD player, press CD 3¥8, then 7 before going to the next step.
2 Activate the Program Play mode.
On the unit:
CD PLAY
Press CD PLAY MODE repeatedly MODE until “CD PROGRAM” appears on
4 Select a track from the selected disc in step 3.
On the unit:
Turn 4 / ¢ to select the track number, then press
SET/DISPLAY.
On the remote control:
Press the number buttons. | 1 |
• For how to use the number | 4 |
buttons, see “To go to another |
track directly using the number
buttons” on page 15. | 7 |
| |
| 10 |
PR | E |
SET |
SET /
DISPLAY
2 3
5 | 6 |
89
10 
the display.
•Each time you press the button, the play mode changes as follows:
CD PROGRAM 
CD RANDOM
Canceled
(Continuous Play)
On the remote control:
Press PROGRAM so that | PROGRAM |
| |
“CD PROGRAM” appears |
|
on the display. |
|
|
|
| P R G M |
|
|
5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
6 Press CD 3¥8. | CD |
The tracks are played in the order you have programed.
To stop playing, press 7.
To exit from Program Play mode, press CD PLAY MODE repeatedly until the PRGM (program) indicator goes off (or press PROGRAM on the remote control) after playback stops.
| • The PRGM (program) indicator lights up on the display. | |
| If a program has been stored in memory, the program is | |
| called up. |
|
3 | Press one of the disc number | CD3 |
| ||
(CD1, CD2, or CD3) buttons | CD2 |
| |
to select the disc you want to | CD1 |
| |
play. |
|
Track number |
|
P R G M
•If you try to program a 33rd track, “CD FULL” will appear on the display.
•If you have tried to program a track from an empty tray, “NO DISC 1,” “NO DISC 2,” or “NO DISC 3” will appear on the display for about 2 seconds.
•If the track number you have programed does not exist on the disc, it will be skipped during play.
Disc number | Program step number |
16
