RDS
CONTROL
EON ON/OFF
1
TA/NEWS/
INFO
4
EON Function ——————————————————————————
The EON function allows the unit to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or INFO) from a different station except when you are listening to a
❏The EON indicator lights up while receiving a station with the EON code.
❏EON Standby reception is applicable for preset stations only.
To set EON Standby reception, use the Remote Control: 1. Press the RDS CONTROL button.
The number buttons on the Remote Control are set for the RDS operations.
2. Press the EON ON/OFF button.
The last EON data type selected — TA/NEWS/INFO — lights up.
3. Press the TA/NEWS/INFO button repeatedly until the EON data type you want is selected.
TA: Identifies that a traffic announcement is being broadcast in your area.
NEWS: News
INFO: Program the purpose of which is to impart advice in the widest sense.
Each time you press the TA/NEWS/INFO button, the EON data types change as follows:
TA NEWS INFO | = TA | = | NEWS | = | |
| INFO | = TA NEWS | = | NEWS INFO | = |
TA | INFO | =(back to the beginning) |
|
| |
As soon as your selection is entered, the unit goes into EON Standby reception mode.
To cancel the EON function, press the EON ON/OFF button again so that the TA/NEWS/INFO indicator goes off.
❏If you cancel the EON function while receiving a program selected by the EON function, the unit goes back to the previously tuned station.
When this unit carries out EON Standby reception, this unit functions as follows:
|
|
|
|
|
| CASE 1 |
| CASE 2 |
|
| If there is no station broadcasting the program | If there is a station broadcasting the program | ||
| you have selected | you have selected | ||
| The unit continues tuning in the current station. | The unit tunes in the program. The indicator of | ||
| Ç | received PTY code starts flashing. | ||
| Ç | |||
|
|
| ||
| When a station starts broadcasting the program |
|
| |
| you have selected, the unit automatically | When the program is over, the unit goes back | ||
| switches to the station. The indicator of | to the previously tuned station, but still | ||
| received PTY code starts flashing. | remains in EON Standby reception mode. | ||
| Ç |
|
| |
| When the program is over, the unit goes back |
|
| |
| to the previously tuned station, but still |
|
| |
| remains in EON Standby reception mode. |
|
| |
|
|
|
|
|
16
