JVC CA-MD9R manual First Track Recording 1ST Track REC, Press the 1ST Track REC button

First Track Recording (1ST TRACK REC)

The 1ST TRACK REC function allows you to record the first track of each loaded CD. You can, for example, make a directory of all your best CDs.

	1.
1ST TRACK REC	2.

Prepare CDs, and a recordable MD into the MD1 loading slot.

❏Always place a CD on the CD1 tray and insert the recordable MD into the MD1 loading slot. If not, this function does not work.

Press the 1ST TRACK REC button.

The indicator next to the 1ST TRACK REC button lights up and the recording starts.

3	3		3	3
CD	MD		CD	MD
2	2	\	2	2
1	1		1	1
CD			CD
1			1

Appears only when	Remaining time of	Remaining time
using an 8 cm CD	the current track	of the MD

When the first track of the CD1 is recorded, the first track of the CD2 will be recorded. Recording continues until the first track of each loaded CD is recorded.

3. Replace the CDs on the trays not selected.

❏You can change CDs to continue the First Track Recording using more than 3 CDs.

Changing the Display Mode —————————————————————

You can check the CD track number and MD track number while recording.

DISPLAY

/CHARAPress and hold the DISPLAY/CHARA button on the unit. While holding the button, the following information appears on the display.

CD track number currently playing

3					3
CD					MD
					2
2
1					1
MD
1	2	3	4	5	6

MD track number being recorded

40