![](/images/new-backgrounds/1044423/4442343x1.webp)
The Player built in the
The Quickest Way to Start a CD Is with the One Touch Operation ——————
The power comes on, and operations are done automatically.
❏Press the Ü/8button (or the £button on the Remote Control).
•If there is a CD on the currently selected tray, playback begins from the first track of this CD.
•If there is no CD on the currently selected tray, playback begins from the first track of the following CD.
•If there is no CD on any of the CD trays, “CD NO DISC” appears on the display for a few seconds. Put a CD on one of the trays and press the Ü/8button (or the £button on the Remote Control)
❏Press one of the CD buttons (1 to 3) (or one of the DISC buttons (1 to 3) on the Remote Control).
•If there is a CD on the CD tray for the CD number you have selected, playback begins from the first track of that CD. If there is no CD on the CD tray, “CD NO DISC” appears on the display for a few seconds. Put a CD on that tray, then press the CD button (1 to 3) for that tray (or the corresponding DISC button (1 to 3) on the Remote Control).
❏Press the 0 button.
•The power comes on, and the corresponding tray comes out automatically.
Using the CD Player
CD 3
CD 2
CD 1
CD 3
CD 2
CD 1
Loading CDs ———————————————————————————
1. Press the 0button on the CD Player you want to load the CD onto.
The CD tray comes out automatically.
2. Place a CD, with its label side up, onto the tray.
CD
Tray
CORRECTINCORRECT
❏To put an 8 cm CD on a tray, insert it so that it is aligned with the groove in the tray’s center.
Note: To avoid malfunctions when you play a CD, place the CD in the right place at the center of the tray.
3. Press the 0 button to close the tray.
4. Repeat steps 1 to 3 to load other CDs on the other trays.
❏To continue putting CDs on the other trays, even if a tray is open, by pressing the 0button of another CD tray, the open tray will close automatically, and the new CD tray will slide out.
19