JVC CA-MD9R manual Title Function, Giving a Title to an MD, Letters and symbols

TITLE Function

This function allows you to give a name containing up to 32 characters to each MD and to each track.

Giving a Title to an MD ——————————————————————

MD 3	After putting a name to a disc, it will appear when you play the disc.
	/

MD 1	\	1.
MD 2
		2.

Be sure that the MD you want to edit is in one of the MD loading slots.

Select the MD you want to edit.

Press the corresponding MD button (1 to 3), then the 7button.

BASSTITLE

SOUNDEDIT 3. Press the TITLE button.

3															3
CD															MD
2															2
1															1
MD
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

SET

4. Press the SET button.

Cursor position flashes “A” flashes.

3															3
CD															MD
															2
2
1															1
MD
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

DISPLAY

/CHARA

MULTI JOG

5. Press the DISPLAY/CHARA button to select the character set you want.

❏Each time you press the button, the character sets change as follows:

	Capital	letters and symbols	See page 50 for more information
	Ç
		letters and symbols	about these character sets.
5 Small
Ç
	Numbers

6. Rotate the MULTI JOG dial to select a character you want.

7. Press the SET button to enter the selected character.

❏If you have entered an incorrect character, press the CANCEL button to cancel the last entry.

SET

BASSTITLE SOUNDEDIT

8. Repeat steps 5 to 7 to enter up to 32 characters.

Next entry position The characters you can select.

3															3
CD															MD
2															2
1															1
MD
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

Title you are entering

❏If you want to cancel the editing, press the 0button.

9.Press the TITLE button to memorize the title.

“EDITING” appears on the display.

10.Press the 0 button to eject the MD.

“WRITING” appears while the modification you have made is being recorded on the MD.

49