JVC CA-MXDVB10 manual To show the on-screenindication, On the remote control ONLY, number buttons

Continued

While playing back a disc encoded with Dolby Digital, the DOLBY DIGITAL lamp on the front panel lights up. If it has multichannel signals—5.1ch, the Surround mode is automatically activated.

While playing back an MPEG Multichannel disc, the Surround mode is automatically activated.

•Using the on-screen menus, you can adjust the speaker settings for 5.1ch Surround mode depending on your room situation. (See page 40.)

•While playing back a multichannel disc, the front left and the front right signals are output when—

—hearing a disc through headphones. —hearing a disc through AUX OUT jacks. —recording onto tapes.

•You can also confirm the current channel setting by pressing DISPLAY on the unit. (See page 51.)

To use Time Search and Chapter Search on the TV screen

• You cannot use this function while using Random play.

On the remote control ONLY:

1 Press PLAY MODE during play.

The play mode screen appears.

2 Press CONTROL + or − to move to “TIME SEARCH” or “CHAP. SEARCH,” then press ENTER.

“GO TO _: _ _:_ _ ” for Time Search or “GO TO CHAPTER = ” for Chapter Search appears on the TV screen.

	DVD CONTROL
Title numbers of the currently playing disc.	REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
(Numbers exceeding 16 are not displayed.)	REPEAT	CHAPTER

GO TO CHAPTER =

Ex.: When “CHAP. SEARCH” is selected.

3 Enter desired playing time or chapter number by pressing the

	Current title	Current Chapter	Elapsed title	number buttons.
				• You can only use Time Search
	number	number	playing time
				within a currently playing title.
	7			Ex.: To enter the time of “0:23:45,”
To stop playing, press .					press 0, 2, 3, 4 and 5. (Always
•	This unit can memorize the stop point of DVD, and when
	you start playback again by pressing DVD 3¥8 (or				enter all 5 digits.)
	DVD 3 on the remote control), playback starts from the				To enter chapter number 23, press 2 and 3.
	beginning of a chapter previously stopped—Resume play.				To enter chapter number 3, press 3.
	To use Resume play, you need to turn on the Resume
	function. (See page 42.)							−
•	To stop completely, press 7 twice.			To cancel misentry for Time Search, press CONTROL .
				Each time you press the button the last number you
To remove the disc, press 0 for the corresponding disc tray.				entered is erased. (You cannot erase a chapter number.)
To go to another chapter				4 Press ENTER.
				The unit starts playback of the selected
Turn 4 / ¢ during playback (or
				point.
press 4 or ¢ on the remote
control).				To erase the on-screen indication, press PLAY MODE
• 4: Goes back to the beginning of
				again.
	the current or previous chapters.
• ¢: Skips to the beginning of the				To show the on-screen indication
	next or succeeding chapters.
To go to a particular title or chapter directly using the				You can show the following information on the TV screen
				while playing back a disc.
number buttons on the remote control				To show the on-screen indication, press
• Pressing the number buttons before playback allows you to
				DISPLAY while playing a disc.
	start playing from the title number you want.
				• Each time you press the button, the indication
• Pressing the number buttons during playback allows you to
				on the TV screen changes as follows:
	start playing from the chapter number of the currently
	playing title you want.					Current disc information
	Ex.: To select number 5, press 5.					(See page 17.)
						Off	Disc playing
	To select number 10, press 10.
					(No indication)		information

To select number 20, press +10 then 10.

To select number 23, press +10, +10 then 3.

– 20 –