JVC CA-MXG50 Playing Back Tapes

– 16 –

English

Playing Back Tapes

Playing Back a Tape

1

Press EJECT (0) for the deck you want to

use.

2

Put a cassette in with the exposed part of the

tape down.

• You can play back only type I.

3

Close the cassette holder gently.

If you put cassettes in both decks A and B, the last deck

which you have put a cassette into is selected.

To operate the other deck, press TAPE A or TAPE B (or

TAPE A/B on the remote control).

4

Pr ess TAPE 3.

The tape play starts and the tape running

indicator (3) starts flashing slowly.

When the tape plays to the end, the deck

automatically stops.

The use of the C-120 or thinner tape is not

recommended, since characteristic deterioration

may occur and this tape easily jams in the pinch-

rollers and the capstans.

To stop during play, press 7.

To operate the other deck, press TAPE A or TAPE B (or

TAPE A/B on the remote control), then TAPE 3.

To fast-forward the tape, press ¡ (or ¢ on the remote

control). The tape running indicator (3) starts flashing

quickly.

To rewind the tape, press 1 (or 4 on the remote

control). The tape running indicator (2) starts flashing

quickly.

To remove the cassette, press 0 EJECT for deck A or

EJECT 0 for deck B.

EJECT EJECT

For Deck A

For Deck B

EJECT EJECT

TAPE

EN13-16.CA-MXG50[UW]_f 01.4.3, 2:18 PM16

Contents

Main COMPACT COMPONENT SYSTEM SISTEMAS DE COMPONENTES COMPACTOS SISTEMA DE COMPONENTE COMPACTO CA-MXG50[UW]COVER_f 01.4.3, 2:09 PM1 CA-MXG50 LVT0692-007A [UW] INSTRUCTIONS MANUAL DE INSTRUCCIONES INSTRUES Page G-2 Portugus Espaol G-3 IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LSER / IMPORTANTE PARA PRODUCTOS LASER G-4 REPRODUCTION OF LABELS / REPRODUCCIN DE ETIQUETAS / REPRODUO DE ETIQUETAS CLASS 1 LASER PRODUCT 1 Introduction About This Manual Precautions Installation Power sources Contents 3 Location of the Buttons and Controls Front Panel 4 Display Window 126 4 7 9p 35 q 8 Front Panel 5 Remote Control p e r Getting Started Unpacking Putting the Batteries into the Remote Control 3 Connecting Antennas 7 1 terminals on the rear of the unit. 2 into the terminal. 8 To connect audio equipment with an optical digital input terminal NOW, you can plug in the unit and other connected equipment FINALLY! Cancelling the Display Demonstration To start the display demonstration manually Common Operations Turning On or Off the Power Setting the Clock Press CLOCK/TIMER. Press 4 or to adjust the hour, then press SET. + + 11 Reinforcing the Bass Sound Selecting the Sound Modes 12 Listening to FM and AM Broadcasts Tuning in a Station Presetting Stations Tuning in a Preset Station 13 Playing Back CDs Loading CDs Press 0. Place one or two discs correctly on the front slots of the carrousel, with its label side up. If you wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the remote control. 14 Basic CD Operations To exchange CDs during playback of another To skip to the another CD in the carrousel To stop play for a moment 15 Repeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Tray Lock Program other tracks you want. Press CD 6. Playing Back Tapes Playing Back a Tape Press EJECT (0) for the deck you want to use. Put a cassette in with the exposed part of the tape down. Close the cassette holder gently. Recording Recording a Tape on Deck B Press EJECT 0 for the deck B. Put a recordable cassette in with the exposed part of the tape down. Close the cassette holder gently. 18 CD Synchronized Recording Dubbing Tapes 19 Using the Microphones Singing Along (Karaoke) Microphone Mixing 20 Using the Timers Using Daily Timer How Daily Timer actually works Press CLOCK/TIMER repeatedly until DAILY appears on the Press CLOCK/TIMER again. 21 When you have selected TUNER FM or TUNER AM in step 5. Select a preset station number. Press 4 or to set the volume level. Press SET to complete the Daily Timer setting. To turn on or off Daily Timer after its setting is done 22 Using Sleep Timer How Sleep Timer actually works On the remote control ONLY: Press SLEEP. Maintenance To get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes Handling discs Troubleshooting Specifications Amplifier section CA-MXG50 Tuner CD player Cassette deck V