JVC CA-MXG50 manual Playing at Random Random Play, Repeating Tracks or CDs Repeat Play

English

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

6 Press CD 6.

The tracks are played in the order you have programed.

To stop during play, press 7.

To exit from Program play mode, press PROGRAM again before or after play so that the unit enters Continuous play mode. (The program you have made is stored in memory until you turn off the unit or erase the program.)

To modify the program

Before playing, you can erase the programed	/DEMO
	CANCEL
tracks shown on the display by pressing CANCEL.

•Each time you press the button, the last programmed track is erased from the program.

To check the program during play, press ¢(or 4) so that the playing track will change according to the program (or reverse) order.

To add tracks in the program before play, simply select the disc numbers and/or track numbers you want to add by following steps 3 and 4 of the programming procedure on page 14.

To erase the entire program before or during play, press 7twice.

• Ejecting a carrousel will also erase the stored memory.

If you try to program a 33rd track

“FULL” will appear on the display.

If your entry is ignored

You have tried to program a track from an empty tray, or a track number that does not exist on the CD. Such entries are ignored.

Playing at Random — Random Play

The tracks of the selected CD will play at random.

1 Load a CD.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press RANDOM so that “RANDOM” M RANDOM

appears on the display.

The RANDOM indicator also lights up on the display.

•The tracks are played automatically at random. Random play ends when all tracks are played once.

To stop during play, press 7.

• Random play also stops when 0is pressed.

To exit from Random play mode, press RANDOM again during play so that the unit enters Continuous play mode.

To use Random play mode, you have to exit from the

Program play mode.

If you press ¢or 4

Skips to the next track selected randomly.

Repeating Tracks or CDs — Repeat Play

You can have all the CDs, the program or the individual track currently playing repeat as many times as you like.

To repeat play, press REPEAT during or before REPEAT PROGRAM

playing.

•Each time you press the button, Repeat play mode changes as follows, and the following indicator lights up on the display:

ALL DISC 1 DISC REPEAT 1

REPEAT ALL DISC REPEAT 1 DISC

REPEAT 1:Repeats one track on one CD.

REPEAT 1 DISC*: Repeats all the tracks on one CD.

REPEAT ALL DISC: Repeats all the tracks on all the CDs. * REPEAT 1 DISC is not used for Program play.

To cancel Repeat play, press REPEAT repeatedly until the REPEAT indicator (REPEAT 1, REPEAT 1 DISC or REPEAT ALL DISC) goes off from the display.

•Repeat play and Random play cannot be used at the same time.

Prohibiting Disc Ejection — Tray Lock

You can prohibit CD ejection from the unit and lock CDs.

•This operation is possible only while the unit is on with CD selected as the source.

On the unit ONLY:

To prohibit disc ejection, press 0 for the carrousel while holding 7.

“LOCKED” appears for a while, and the carrousel is locked.

To cancel the prohibition and unlock the CDs, press 0for

the carrousel while holding 7.

“UNLOCKED” appears for a while, and the carrousel is unlocked.

If you try to eject CDs

“LOCKED” appears to inform you that the Tray Lock is in use.

– 15 –