JVC CA-MXG50 Specifications

– 24 –

English

Specifications

Amplifier section — CA-MXG50

Output Power

SUBWOOFERS: 70 W per channel, min. RMS, driven into

6 Ω at 63 Hz with no more than 10% total

harmonic distortion.

MAIN SPEAKERS:30 W per channel, min. RMS, driven into

4 Ω at 1 kHz with no more than 10% total

harmonic distortion.

Audio input sensitivity/Impedance

(at 1 kHz, measured at MAIN SPEAKERS)

AUX: 400 mV/50 kΩ

MIC:2.5 mV/5 kΩ

Digital output: DIGITAL OUT (OPTICAL)

Signal wave length: 660 nm

Output level: –21 dBm to –15 dBm

Speakers/Impedance: Subwoofer: 6 Ω — 16 Ω

Main speaker: 4 Ω — 8 Ω

Tuner

FM tuning range: 87.50 MHz — 108.00 MHz

AM tuning range:

At 9 kHz intervals : 531 kHz — 1 602 kHz

At 10 kHz intervals : 530 kHz — 1 710 kHz

CD player

CD Capacity: 3 CDs

Dynamic range: 85 dB

Signal-to-noise ratio: 85 dB

Cassette deck

Frequency response

Normal (type I): 50 Hz — 14 000 Hz

Wow and flutter

0.15% (WRMS)

General

Power requirement: AC 110 V / AC 127 V / AC 220 V /

AC 230 V — AC 240 V (adjustable with

the voltage selector), 50 Hz / 60 Hz

Power consumption: 130 W (at operation)

17 W (on standby)

Dimensions (approx.): 270 mm x 317 mm x 447 mm (W/H/D)

(10 11/16 in. x 12 1/2 in. x 17 5/8 in.)

Mass (approx.): 8.9 kg (19.6 lbs)

Supplied accessories

See page 6.

Design and specifications are subject to change without notice.

EN17-24.CA-MXG50[UW]_f 01.4.3, 2:18 PM24

Contents

Main COMPACT COMPONENT SYSTEM SISTEMAS DE COMPONENTES COMPACTOS SISTEMA DE COMPONENTE COMPACTO CA-MXG50[UW]COVER_f 01.4.3, 2:09 PM1 CA-MXG50 LVT0692-007A [UW] INSTRUCTIONS MANUAL DE INSTRUCCIONES INSTRUES Page G-2 Portugus Espaol G-3 IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LSER / IMPORTANTE PARA PRODUCTOS LASER G-4 REPRODUCTION OF LABELS / REPRODUCCIN DE ETIQUETAS / REPRODUO DE ETIQUETAS CLASS 1 LASER PRODUCT 1 Introduction About This Manual Precautions Installation Power sources Contents 3 Location of the Buttons and Controls Front Panel 4 Display Window 126 4 7 9p 35 q 8 Front Panel 5 Remote Control p e r Getting Started Unpacking Putting the Batteries into the Remote Control 3 Connecting Antennas 7 1 terminals on the rear of the unit. 2 into the terminal. 8 To connect audio equipment with an optical digital input terminal NOW, you can plug in the unit and other connected equipment FINALLY! Cancelling the Display Demonstration To start the display demonstration manually Common Operations Turning On or Off the Power Setting the Clock Press CLOCK/TIMER. Press 4 or to adjust the hour, then press SET. + + 11 Reinforcing the Bass Sound Selecting the Sound Modes 12 Listening to FM and AM Broadcasts Tuning in a Station Presetting Stations Tuning in a Preset Station 13 Playing Back CDs Loading CDs Press 0. Place one or two discs correctly on the front slots of the carrousel, with its label side up. If you wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the remote control. 14 Basic CD Operations To exchange CDs during playback of another To skip to the another CD in the carrousel To stop play for a moment 15 Repeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Tray Lock Program other tracks you want. Press CD 6. Playing Back Tapes Playing Back a Tape Press EJECT (0) for the deck you want to use. Put a cassette in with the exposed part of the tape down. Close the cassette holder gently. Recording Recording a Tape on Deck B Press EJECT 0 for the deck B. Put a recordable cassette in with the exposed part of the tape down. Close the cassette holder gently. 18 CD Synchronized Recording Dubbing Tapes 19 Using the Microphones Singing Along (Karaoke) Microphone Mixing 20 Using the Timers Using Daily Timer How Daily Timer actually works Press CLOCK/TIMER repeatedly until DAILY appears on the Press CLOCK/TIMER again. 21 When you have selected TUNER FM or TUNER AM in step 5. Select a preset station number. Press 4 or to set the volume level. Press SET to complete the Daily Timer setting. To turn on or off Daily Timer after its setting is done 22 Using Sleep Timer How Sleep Timer actually works On the remote control ONLY: Press SLEEP. Maintenance To get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes Handling discs Troubleshooting Specifications Amplifier section CA-MXG50 Tuner CD player Cassette deck V