JVC RX-TD77R, CATD77, XT-TD77R manual Regular Play, Tape Direction Indicator and the Display

English

TAPE

TAPE

Regular Play

If the power is already on, you can use this basic procedure:

1.Press the 0 button.

“OPEN” appears on the display and the Tape Tray opens.

2.Insert a tape into the Tape Tray with

the tape head at the back.

3.Press the 0 button again.

“CLOSE” appears on the display and the Tape Tray closes.

4. Press the TAPE button.

The tape is played in the direction shown by the Tape Direction indicator.

•If the Tape Tray is open, it automatically closes and the tape is played when you press the TAPE button.

•If the Cassette Deck is already selected as the playback source, press the 2 or 3button to play the tape in that direction.

•If the Remote Control is in Cassette Deck control mode, press the 3 button on the Remote Control to play the tape in the direction shown by the Tape Direction indicator.

To stop playing, press the 7button on the Unit or press the 7	button on the Remote Control after
switching to Cassette deck control mode.

To remove the tape, press the 0button. The tape automatically stops and the Tape Tray opens.

To change the direction of playback for the tape, press the 2or 3button. If you are using the

Remote Control, press the TAPE DIRECTION button.

Tape Direction Indicator and the Display —————————

Tape Direction indicator

The Tape Direction indicator shows you which direction the tape is being played in. The direction of playback and the Tape Direction indicator display are shown below.

When the indicator is 3 When the indicator is 2

oDuring playback, the Tape Direction indicator blinks slowly. During fast left or fast right, the indicator blinks quickly. During Music Scan mode, the direction indicator alternates between blinking slowly and quickly repeatedly.

Display

The display includes a tape counter which shows you which direction a tape is being played. The tape counter increases when the tape is playing in the 3direction, and decreases when the tape is played in the

2direction.

oWhen the Tape Direction indicator shows 3, the counter increases when you fast forward a tape and decreases when you rewind a tape.

When the Tape Direction indicator shows 2, the counter decreases when you fast forward a tape and increases when you rewind a tape.

oWhen the Tape Direction indicator shows 3, the following happens when you do a Music Scan.

•When you scan to the next selection, the counter increases.

•When you scan to the previous selection, the counter decreases.

oWhen the Tape Direction indicator shows 2, the following happens when you do a Music Scan.

•When you scan to the next selection, the counter decreases.

•When you scan to the previous selection, the counter increases.

COUNTER

RESET

To reset the tape counter, press the COUNTER RESET button. The counter returns to “0000”.

36