JVC DLA-RS55 manual The update has been completed. Close the update program

After the progress bar reaches 100%, the three LEDs will begin flashing. Please continue to wait.

After a while, the STAND-BY light will light Red. The others will be off.

Close Up LEDs

(3)The update has been completed. Close the update program.

(4)After updating, remove the power cable from the projector, wait until all lights go out, then reconnect power.

Close Up LEDs

Please check that the software version: 28.056 has been updated after finishing the update. The version number is available in the Information tab of the projector menu.