JVC DLA-SH4KNL - page 18

18
Setup
Connection During Two-Screen/Four-
Screen Mode Display
The two-screen/four-screen mode enables simultaneous display of signals from two or four computers.
To select the two-screen mode, set “Display Mode” in the Setting menu to “Double”. To select the four-screen mode, set it
to “Cross”. (APage27)
Possible Input Signals and Projected Image
NOTE:
●This projector converts the frame rate to 60 Hz regardless of the synchronizing signal frequency at the computer’s end.
●The respective signals are displayed at the center of the split screen.
●When in the two-screen mode, the screen appears blue (or black depending on the setting) when there is no input.
Connecting Video Signals of
the Computer (Cont’d)
Computer 1, Computer 2 Output Status
Resolution
Channel Link Status
2048  1200 1ch Single Normal 2048  1200
2048  1080 1ch Single Normal 2048  1080
1920  1200 1ch Single Normal 1920  1200
1920  1080 1ch Single Normal 1920  1080
1600  1200 1ch Single Normal 1600  1200
1280  1024 1ch Single Normal 1280  1024
1024  768 1ch Single Normal 1024  768
800  600 1ch Single Normal 800  600
640  480 1ch Single Normal 640  480
4096
DVI 1 DVI 3
2400
2048
4096
DVI 1
DVI 3
DVI 2
DVI 4
2400
1200
2048
Two-Screen Mode
(Example) DVI 1: 19201080,
DVI 3: 19201080
Four-Screen Mode
(Example) DVI 1: 20481200, DVI 2: 19201080,
DVI 3: 1024768, DVI 4: 16001200
DLA-SH4_EN.book Page 18 Tuesday, January 15, 2008 6:07 PM