Getting Started
Names and Functions of Parts
Front/Right Side
A
Intake air
Intake air
B C D
AAir Inlet/Filter
The air inlets absorb air to cool the interior of the projector. A filter is mounted inside the projector to remove dirt in the air that enters through the inlets. Clean the filter regularly. (A Page 42)
CAUTION:
●Do not block the air inlets with papers, cloth, or soft cushions. Doing so may cause heat to trap inside the projector and result in fire or malfunction.
BLens Cap (included with the optional lens)
Fit the cap on the lens when this projector is not in use to prevent the lens from becoming dirty.
CAUTION:
●Do not project images with the lens cap attached. The lens cap may be deformed due to the heat, or the projector may malfunction.
CProjection Lens (optional)
Zoom lens or short focal length lens is optional. (A Page 8)
Remove the lens cap before projection.
E F
DLens Mounting Bracket
Mount the optional projection lens.
EAdjustable Feet (x 4)
Adjust the feet until the projector is level. The adjustable range is 20 mm for each. (A Page 13)
FAir Inlet/Filter
The air inlets absorb air to cool the interior of the projector. A filter is mounted inside the projector to remove dirt in the air that enters through the inlets. Clean the filter regularly. (A Page 42)
10
