JVC DLA-X30, DLA-X90R, DLA-X70R manual Clear Motion Drive, CMD Demo, Lens Aperture, Lamp Power

ENGLISH

Adjustments and settings in the menu (continued)

Select cursor

Picture Adjust

>> User Name Edit

Name User 1

A B	C	D	E	F	G	H	I J	K L	M
N O	P	Q	R	S	T	U	V W	X Y	Z
a b	c	d	e	f	g	h	i j	k l	m
n o	p	q	r	s	t	y	v w	x y	z
1 2	3	4	5	6	7	8	9 0	, .	^
! "	#	$	%	&	*	+	- /	= ? @
: ;		~	(	)	<	>	[ ]	{ }	\

SPACE	Clear	All Clear	OK
Exit	Operate Back
MENU Select		BACK

Input cursor

Character list

Clear Motion Drive		It improves video images with fast movements to produce clear video images with little
		residual image retention.
		This cannot be set when the PC Signal/3D Signal and "[2-3] 2D/3D" are ON.
		Moreover, it may happen that the image is distorted in some scenes, or light and dark
		flashes occur. In this case, please choose "Off", etc., and then a setting of your choice.
		Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Inverse Telecine	[Off]
	Off	Off
	Mode 1	Black insertion weak
	Mode 2	Black interpolation strong
	Mode 3	Interpolation weak
	Mode 4	Interpolation strong
	Film Motion	With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image
		footage is changed to a 24 frame display.
		(*) 24p will not function.
CMD Demo		It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion
		drive. Upon pressing the button "OK", it will be displayed on all sides of a screen in the
		center split into two parts. Finally, it will turn to "Off”. It cannot be set for PC and 3D
		signals.
		Settings: Left, right, top, Bottom, Off	[Off]
	Left	The left screen displays a demonstration of the Clear motion drive.
	Right	The right screen displays a demonstration of the Clear motion drive.
	Top	The upper screen displays a demo of the Clear motion drive.
	Bottom	The screen below displays a demo of the Clear motion drive.
	Off	The Demo of the Clear motion drive is turned off.
Lens Aperture		Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully
		opened.
		Settings: (Dark) -15 to 0 (bright)	[0]
Lamp Power		It is possible to change the brightness of the lamp.

(*)If continually used with "High", the lamp will become dark earlier.

(*)The more one lets the interior temperature of the device rise due to generation of heat, the less the level of tolerance against high temperatures.

(*)For about 60 seconds after the lamp is lit, the lamp cannot be switched off.

	(*) This will be "High" when the "Picture Mode” is set to "3D". 90	70	X307
	(*) This will be "High" when the "Picture Mode” is set to "3D", "Film" and "Cinema".
	Settings: Normal, High	[Normal]
Normal	Normally this setting is chosen.(160W drive)
High	In a bright room, when the video is hard to see, this setting is chosen.(220W drive)

Operation

57