JVC DLA-X30, DLA-X90R manual See Pixel Adjust Flow and Operation AdjustFine, （-20/-20） （ 5 / 5 ）

ENGLISH

Adjustments and settings in the menu (continued)

See Pixel Adjust Flow and Operation: Adjust(Fine)

After making overall adjustment for error across the entire screen, proceed to fine-tuning. Press the [COLOR TEMP] button on the remote control to display the [Adjust(Fine) Window]. Also, from the main menu, set the [Adjust Area] to [All] and select [Adjust Color] and [Adjust Pattern], then move the cursor to [Adjust (Fine)] and press the [OK] button on the remote control to display the adjust pattern and the fine tune window.

(*) The range of adjustment may narrow depending on the adjust amount of the entire screen.

Adjust(Fine) window

You can use the [UP], [DOWN], [LEFT], and [RIGHT] buttons to change position.

Adjust Pattern

Pixel Adjust

Whole Adjust (Fine) Red

H -1（-20/-20）

V1 （ 5 / 5 ）

	ADJUST.	Color P.	A. Area	Select
Color A.					BACK
GAMMA	COLOR.	COLOR.	PIC.	Operate	BACK
	TEMP	P.FILE.	ADJ.

H (Horizontal)

Vercital

Press the [OK] button on the remote control to enter the adjust operation mode. Use the [UP], [DOWN], [LEFT], and [RIGHT] buttons to move and adjust pixels in the vertical and horizontal directions across the entire screen. The adjustment settings appear in the center of the Adjust (Fine) window. Use the [BACK] button to exit the adjust operation mode.

Pixel adjust setting

Remote Control

Operation Guide

(Reference page: 68)

Adjust(Fine) window

Pixel Adjust

Adjust(Fine)Whole (Fine) Red

H -1（-20/-20）

V1 （ 5 / 5 ）

Color A. ADJUST.		Color P.	A. Area	Select
					BACK
GAMMA	COLOR.	COLOR.	PIC.	Operate	BACK
	TEMP	P.FILE.	ADJ.

Adjust setting

Adjust Color

Operation

This shows the maximum and minimum overall screen error.(Max)/(Min)

When both H (horizontal direction) and V (vertical direction) show a maximum overall screen error of 31, even if the adjust setting is less than this, you may not configure an adjustment setting that is larger than the displayed setting. Furthermore, when the minimum overall screen error is -31, even if the adjust setting is greater than this, you may not configure an adjustment setting that is larger than the displayed setting.

69