Adjusting and Storing the
Equalizer Curve
You can modify the Equalizer settings to create a response curve more appealing to your personal taste.
1 Select the equalizer characteristic to adjust. See "Equalizer Presets" (on page 28).
2 Press the MODE button. The Frequency band indication in the display flashes.
3 Rotate the Audio Control knob to adjust to your desired level.
4
5 Rotate the Audio Control knob to adjust to your desired level.
6 Repeat the steps 4 to 5 above until all the frequency bands (16 kHz) are adjusted.
To store the adjusted contents
1)Press and hold the MODE button for at least 2 seconds.
The display flashes and you can store the adjusted curve.
(When pressing one of the 1 - 6 buttons, you can also store the adjusted curve.)
2)While the display is blinking, press one of the 1 - 6 buttons that you want to store.
NOTE
The contents of DHE/EQ can be stored. (The settings of LPS are not stored.)
7 Press the DSP button to select OFF to return to normal mode.
NOTE
You can also select the frequency band to be adjusted by pressing the g DN button or f UP button.
Recalling the Stored Equalizer Curve
1 Press the DSP button to select EQ MEMORY mode.
→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←
2 Press the g DN button or f UP button to select your desired curve form the MEMORY 1 - MEMORY 6.
Direct select
Press one of 1 - 6 buttons to activate your desired curve.
(If you select the PRESET 2)
3 Press the DSP button to select OFF to return to normal mode.
→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←
NOTE
This function is inoperable when DEFEAT is ON (refer to page 9).
Choosing the Listening Position Selector (L.P.S.)
This feature gives the user the ability to adjust the time delay of the 4 main speakers to provide the ideal sound stage for each listener in the car. The staging can be optimized for the front passenger, driver, front passenger and driver, or front and rear passengers and driver.
1 Press the DISP button to select LPS mode.
→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←
2 Press either g DN button or f UP button. The seat position will change every time the button is pressed.
Select the desired seat position.
→ OFF ← → ALL ← → FRONT ←
→
Direct select
Press the desired button from the 1 - 5 buttons.
[1] | : OFF | [4] | : |
[2] | : ALL | [5] | : |
[3] | : FRONT |
|
|
3 Press the DSP button to select OFF to return to normal mode.
→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←
NOTE
You cannot use the L.P.S. and Time Correction at the same time.
