CD Player Operation

SOURCE -/J

g DN f UP

Opening and Closing the Movable display

1 Press the c button.

The movable display will open.

To close the movable display, press the c button again.

The movable display will close.

NOTES

Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.

The display will stop at the set angle when closing.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

REPEATc

Playback

1 Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

2 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. The movable display will close and playback will begin.

When a disc is already inserted, press the SOURCE button to switch to the CD mode. The mode will change every time the button is pressed.

TUNER CD CD CHANGER

(Only when the CD changer is connected)

3 To pause playback, press the -/Jbutton. Pressing the -/Jbutton again will resume playback.

4 To eject the disc, press the c button.

NOTE

If the CD does not eject, press c button again for more than 2 seconds with the movable display open.

20-EN

Page 22
Image 22
Alpine CDA-7878R owner manual Opening and Closing the Movable display, Playback, → Tuner → CD → CD CHANGER∗