Installation and Connections
Connections
ISO Antenna Convertor Plug
(Pink/Black) | AUDIO INTERRUPT IN | 2 | ||
(Blue/White) | REMOTE | 3 | ||
(Red) | IGNITION | 4 |
| |
|
| |||
(Black) | GND |
| 9 | 8 |
(Blue) | POWER ANT 5 |
| ||
choke | 6 |
|
| |
coil |
|
| 7 |
|
(Yellow) | BATTERY |
|
| |
| < | |
= 1 | - | |
! | ||
| ||
> |
| |
| ||
NORM EQ/DIV | . | |
" | ||
|
(Bottom of the unit)
? 3WAY
/
(Side of the unit)
| (Green) | $ |
| (Green/Black) | % |
|
| |
| (White) | & |
| (White/Black) | ( |
|
| |
| (Grey/Black) | ) |
| (Grey) | ~ |
|
| |
# | (Violet/Black) | + |
| (Violet) | , |
Antenna
ISO Antenna Plug
To vehicle phone
To amplifier or equalizer
To power antenna
Ignition Key
Battery
:Changer 
(Sold Separately)
Speakers
Amplifier Front
; 
Amplifier Rear
; 
Amplifier Subwoofers*
; 
Speakers
Rear Left
Front Left
Front Right
Rear Right
*When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 6.
To prevent external noise from entering the audio system.
•Locate the unit and route the leads at least 10 cm away from the car harness.
•Keep the battery power leads as far away from other leads as possible.
•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.
•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
