60 EN EDITING

●To pause dubbing, press selection keys to select , then press ENTER. Both the unit and the external DV equipment pause dubbing. Pressing W on the unit also works the same way.

10 Press selection keys to select , then press ENTER. Then press o. The DV equipment stops.

11 Press selection keys to select , then press

ENTER.

12 Press o twice on the remote control to stop dubbing.

●Both the unit and the external DV equipment stop dubbing.

NOTES:

●Dubbing copyright guarded programmes is not possible.

●Original DV information such as the recording date and time are not recorded.

●The superimposed indication during the operation or dubbing is not recorded.

●If the dubbing is paused while the channel is set to ADVB, you cannot switch channels.

When you dub from DV equipment other than a camcorder

A Perform step 1 to 4.

B Locate the point from where you want to start dubbing, then stop on the DV equipment.

●If you pause the DV equipment in this step, a few second’s still picture will be recorded at the beginning of the recorded programme.

CSet the input mode to ADV INPUTB on the DV equipment.

●If you select an input mode other than ADV INPUTB, unwanted pictures may be recorded at the beginning of the recorded programme.

DPerform step 9 to 12.

To skip unwanted part of the source picture

Press ENTER to stop both equipment, then press selection keys

to select .

Locate the point where you want to restart dubbing by pressing I, N, or O, then press o.

Press selection keys to select , then press ENTER to restart dubbing.