Wolf ICBCT30I Installation I N S T R U C T I O N S Unframed I N S Ta L L At I O N S

Models: ICBCT30I

1 88
Download 88 pages 22.45 Kb
Page 15
Image 15
INSTALLATION I N S T R U C T I O N S

INSTALLATION I N S T R U C T I O N S

UNFRAMED I N S TA L L AT I O N S

F L U S H M O U N T I N S TA L L AT I O N

OPTION 2: For this flush mount installation, the countertop cut-out will be the same size as the outer edge of the glass top. It is recom- mended that cooktop itself be used as the template for the cut-out. Turn the cooktop over and mark the opening using the glass top as a template.

It will be necessary to attach L-shaped brackets or cleats to the inner perimeter of the cut-out to support the cooktop. The top edge of the bracket can be no wider than 22 mm and will be attached 8 mm below the surface of the countertop. Refer to the illustration below. Attachment of the brackets is up to the installer's discretion, wherever enough coun- tertop material is present.

For additional support in the cut-out area, adhere scrap countertop material to the bottom side of the countertop. Consult your countertop supplier for the proper methods of attachment.

F R A M E L E S S I N S TA L L AT I O N

Unframed induction cooktop Models ICBCT30IU and ICBCT36IU can be installed as a frameless application, with the glass mounted on top of the countertop surface. For counter- top cut-out dimensions, refer to the Installation Specifications illustration on page 12 for Model ICBCT30IU and page 13 for Model ICBCT36IU.

8 mm

L-Shaped

 

Brackets

22 mm

 

Flush mount installation brackets

15

Page 15
Image 15
Wolf ICBCT30I Installation I N S T R U C T I O N S Unframed I N S Ta L L At I O N S, Flush mount installation brackets